You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Thin Film Deposition of Highly Conductive Metals for Sensor Applications- Phase II

    SBC: Summit Information Solutions, Inc.            Topic: A17AT001

    Deposition of highly conductive, continuous thin film metals has proven to be a significant challenge. There are several techniques that allow deposition of these metals, but their application is limited to planar surfaces and only offer complete line of sight deposition. During a recent Phase I STTR project, Summit Information Solutions, Inc. (Summit), in partnership with University of Alabama in ...

    STTR Phase II 2019 Department of DefenseArmy
  2. Wavelength-Agile Real Time Tabletop X-ray Nanoscope based on High Harmonic Beams

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: ST15C001

    Nanoscale, material sensitive, imaging techniques are critical for progress in many disciplines as we learn to master science and technology at the smallest dimensions — on the nanometer to atomic-scale. However, progress in both science and technology is becoming increasingly limited by the constraints of current imaging techniques and metrologies. Fortunately, by combining coherent extreme UV ...

    STTR Phase II 2019 Department of DefenseDefense Advanced Research Projects Agency
  3. Smart Baseplate for Additive Manufacturing

    SBC: Luna Innovations Incorporated            Topic: DLA18A001

    Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods, or for fabrication of small quantities of complex parts. One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made. This is especially critical given the rel ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  4. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD Research Corporation            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is crucial to detect proliferation of nuclear material. Critical challenges include: (a) high sensitivity detection of signature emissions from radioactive isotopes, and (b) cost-effectiveness for deployment of sensor networks across large storage facil ...

    STTR Phase II 2019 Department of DefenseDefense Threat Reduction Agency
  5. Storable Clean Ethane/ethylene Nitrous Engine (SCENE)

    SBC: PIONEER ASTRONAUTICS            Topic: MDA18T005

    he Storable Clean Ethane-ethylene Nitrous Engine (SCENE) is a proposed technology designed to provide upper stages and spacecraft with non-toxic, liquid, non-cryogenic, high-performance propulsion with an Isp on the order of 300 seconds. The propellant components are stored as liquids under their saturated vapor pressures. With the SCENE, nitrous oxide is used as an autogenously pressurized oxidiz ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  6. Non-Intrusive Uncertainty Identification and Quantification Framework for Hypersonic Flights

    SBC: CFD Research Corporation            Topic: MDA18T006

    Uncertainty Reduction in High Speed Flight Vehicle Modeling | Approved for Public Release 18-MDA-9707 (3 Jul 18)

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  7. Multi-Physics Analysis Tool for High-Energy Gas Lasers

    SBC: Material Flow Solutions, Inc.            Topic: MDA16T001

    Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  8. Large Component, High-quality Composite Fabrication Using Nanocarbon Heating Films

    SBC: Luna Innovations Incorporated            Topic: N18BT031

    Autoclaves are typically used to fabricate high-quality composite components with acceptable thermal properties and low void volume. They provide elevated temperature processing cycles and external pressure required for adequate compaction to achieve these desired properties. However, autoclaves represent large capital and energy investment while limiting the size of fabricated parts and productio ...

    STTR Phase I 2019 Department of DefenseNavy
  9. Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N18BT031

    For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...

    STTR Phase I 2019 Department of DefenseNavy
  10. Collective Meta-Reasoning Runtime Assurance of Machine Intelligence for Unmanned Autonomous Vehicles

    SBC: BARRON ASSOCIATES, INC.            Topic: N18BT032

    Barron Associates has teamed with a prominent researcher in the field of formal verification of cyber physical systems to propose a new paradigm in runtime assurance for complex autonomous systems controlled and operated by artificial machine intelligence. A two-stage approach is considered in which formal verification processes are first performed offline at algorithm design time. Online, during ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government