You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Rapid, Non-Thermally Cured Composite Fabrication

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DLA09001

    Composite materials, with their high strength to weight ratios, manipulative properties, and corrosion resistance are now widely utilized throughout the military. High performance composites are required for air, sea, and land platforms. One of the drawbacks of these composite systems is the excessive costs and time required for part manufacturing. Prolonged elevated temperature curing is typic ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  2. Machine Diagnostics System on a Chip

    SBC: ORBITAL RESEARCH INC            Topic: DMEA102001

    The diagnostic systems in use in military machines are large and expensive. Other military machines could benefit from diagnostic and prognostic systems, but cannot afford the added size, weight and expense. Orbital Research proposes to address this issue by adapting the rugged ASICs that it has presently in development, and those planned for future development, into a single System on a Chip ( ...

    SBIR Phase I 2010 Department of DefenseDefense Microelectronics Activity
  3. Increase Competition through Small Business SAR Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: NANOSONIC INC.            Topic: DLA172001

    The Defense Logistics Agency seeks improved product availability through increased competition for certain Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI).These items have National Stock Numbers (NSN) with an annual demand of > $10,000 and fewer than two manufacturers.NanoSonic is a small advanced company that specializes in innovate additive manu ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Rapid Sourcing for Critical ALRE Items

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DLA172001

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI). Ten ALRE National Stock Number (NSN) items were identified with annual demand values over $10,000 with two or fewer approved sources.Mainstream Engineering has carefully reviewed the ten NSNs provided ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Cost and Lead Time Reduction for Hard to Source Items

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DLA172002

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Land and Maritime Hard to Source Items (HSIs). Three National Stock Number (NSN) / part number (PN) combinations were identified with annual demand values over $10,000 with fewer than two approved sources.Mainstream Engineering has carefully reviewed the NSN/PN combinations provided in the solicitat ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Computerized Robotic Delayering and Polishing System

    SBC: SPECTRAL ENERGIES LLC            Topic: DMEA172001

    The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could help ...

    SBIR Phase I 2018 Department of DefenseDefense Microelectronics Activity
  7. Augmented Reality (AR) within the Defense Logistics Agency (DLA)

    SBC: BOSTON ENGINEERING CORPORATION            Topic: DLA181001

    The Defense Logistics Agency (DLA) believes there may be advantages to using Augmented Reality (AR) technologies, including the associated benefits of Internet of Things (IoT) capabilities, for improving procurement, logistics and distribution processes in its operations today. Commercial businesses around the world are proving gains in reliability, repeatability, and reduced process costs in all ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: VIBRANT CORP            Topic: DLA181002

    The DLA requires a set of procedures for acceptance of repairs and replacement parts made with additive manufacturing (AM). A critical component of that acceptance procedure will be tools for monitoring and control of AM processes. Vibrant Corporation provides process monitoring and control and nondestructive evaluation (NDE) services based on its Process Compensated Resonance Testing (PCRT) techn ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government