You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Rapid, Non-Thermally Cured Composite Fabrication
SBC: LUNA INNOVATIONS INCORPORATED Topic: DLA09001Composite materials, with their high strength to weight ratios, manipulative properties, and corrosion resistance are now widely utilized throughout the military. High performance composites are required for air, sea, and land platforms. One of the drawbacks of these composite systems is the excessive costs and time required for part manufacturing. Prolonged elevated temperature curing is typic ...
SBIR Phase I 2010 Department of DefenseDefense Logistics Agency -
Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs
SBC: ORBIS SIBRO INC Topic: DLA171002ORBIS proposes to Address SBIR DLA171-002 by developing efficient and effective processes to reverse engineer RPPOB Candidate Items. ORBIS has a wealth of experience in supporting DoD systems and components and is well suited to addressing the backlog of unsupported equipment .
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)
SBC: Form Fit and Function LLC Topic: DLA172001This SBIR Phase I proposal to the Defense Logistics Agency (DLA), requests funding for Form Fit and Function, LLC, a small disadvantaged, HUBZone Certified Business, to perform research in the development of an SAR package for NSN 3020-01-560-8493, Pulley, Groove.F3's proven experience in manufacturing and SAR package development, give F3 an advantage in development and decreases Government risk. ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Increase Competition through Small Business SAR Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)
SBC: NANOSONIC INC. Topic: DLA172001The Defense Logistics Agency seeks improved product availability through increased competition for certain Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI).These items have National Stock Numbers (NSN) with an annual demand of > $10,000 and fewer than two manufacturers.NanoSonic is a small advanced company that specializes in innovate additive manu ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Rapid Sourcing for Critical ALRE Items
SBC: MAINSTREAM ENGINEERING CORP Topic: DLA172001Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI). Ten ALRE National Stock Number (NSN) items were identified with annual demand values over $10,000 with two or fewer approved sources.Mainstream Engineering has carefully reviewed the ten NSNs provided ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Cost and Lead Time Reduction for Hard to Source Items
SBC: MAINSTREAM ENGINEERING CORP Topic: DLA172002Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Land and Maritime Hard to Source Items (HSIs). Three National Stock Number (NSN) / part number (PN) combinations were identified with annual demand values over $10,000 with fewer than two approved sources.Mainstream Engineering has carefully reviewed the NSN/PN combinations provided in the solicitat ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: ARCTOS Technology Solutions, LLC Topic: DLA18A001Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Smart Baseplate for Additive Manufacturing
SBC: LUNA INNOVATIONS INCORPORATED Topic: DLA18A001Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Augmented Reality (AR) within the Defense Logistics Agency (DLA)
SBC: BOSTON ENGINEERING CORPORATION Topic: DLA181001The Defense Logistics Agency (DLA) believes there may be advantages to using Augmented Reality (AR) technologies, including the associated benefits of Internet of Things (IoT) capabilities, for improving procurement, logistics and distribution processes in its operations today. Commercial businesses around the world are proving gains in reliability, repeatability, and reduced process costs in all ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: ARCTOS Technology Solutions, LLC Topic: DLA181002This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency