You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Rapid, Non-Thermally Cured Composite Fabrication

    SBC: Luna Innovations Incorporated            Topic: DLA09001

    Composite materials, with their high strength to weight ratios, manipulative properties, and corrosion resistance are now widely utilized throughout the military. High performance composites are required for air, sea, and land platforms. One of the drawbacks of these composite systems is the excessive costs and time required for part manufacturing. Prolonged elevated temperature curing is typic ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  2. Increase Competition through Small Business SAR Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: Nanosonic Inc.            Topic: DLA172001

    The Defense Logistics Agency seeks improved product availability through increased competition for certain Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI).These items have National Stock Numbers (NSN) with an annual demand of > $10,000 and fewer than two manufacturers.NanoSonic is a small advanced company that specializes in innovate additive manu ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Rapid Sourcing for Critical ALRE Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172001

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI). Ten ALRE National Stock Number (NSN) items were identified with annual demand values over $10,000 with two or fewer approved sources.Mainstream Engineering has carefully reviewed the ten NSNs provided ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Cost and Lead Time Reduction for Hard to Source Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172002

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for Land and Maritime Hard to Source Items (HSIs). Three National Stock Number (NSN) / part number (PN) combinations were identified with annual demand values over $10,000 with fewer than two approved sources.Mainstream Engineering has carefully reviewed the NSN/PN combinations provided in the solicitat ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Augmented Reality (AR) within the Defense Logistics Agency (DLA)

    SBC: Boston Engineering Corporation            Topic: DLA181001

    The Defense Logistics Agency (DLA) believes there may be advantages to using Augmented Reality (AR) technologies, including the associated benefits of Internet of Things (IoT) capabilities, for improving procurement, logistics and distribution processes in its operations today. Commercial businesses around the world are proving gains in reliability, repeatability, and reduced process costs in all ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. NanoSonic Sourcing of NSN 8010-01-266-6576 Epoxy Primer Coating

    SBC: Nanosonic Inc.            Topic: DLA181005

    Through the Defense Logistics Agency (DLA) SBIR program, NanoSonic will qualify as an Approved Source for NSN: 8010-01-266-6576 Epoxy Primer Coating DLA Supply Chain: C&E Weapon System: B-2 Part Description:MILSPEC Part Number M85582-2-C2-001P, Dark Green.During the program, NanoSonic will reproduce the primer per requisite technical information via expertise in both coating synthesis and blend co ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Source Approval for B-52 Wing to Fairing Seal

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA181007

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for a number of NESO items with annual demand values over $10,000 and fewer than two approved sources. Mainstream Engineerings unique integration of engineering, manufacturing, quality control, and integrated logistics support (ILS) provides the government with the best value for the proposed NSN.The B- ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Reverse Engineering of MILSTAR Battery Pack

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA182003

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) for the MILSTAR system battery assembly. Mainstream Engineerings unique integration of engineering, manufacturing, quality control, and integrated logistics support (ILS) provides the government with the best value for the proposed NSN.The MILSTAR nickel-metal hydride battery pack lacks sufficient comme ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government