Award Data

The NASA Constellation program has a need to non-destructively test (NDT) non-metallic materials (foams, Shuttle Tile, Avcoat, etc) for defects such as delaminations and voids. While imaging systems at terahertz frequencies (0.3 to 3 THz) have been demonstrated for 2D imaging of similar materials, they have not yet demonstrate full 3D volumetric imaging. To meet this need, LongWave Photonics pro ...

Impact Technologies, in collaboration with the Georgia Institute of Technology and its industrial partners, proposes to develop and demonstrate innovative technologies to integrate anomaly detection and failure prognosis algorithms into automated fault mitigation strategies for advanced aircraft controls. Traditional reactive fault tolerant control approaches fail to provide optimal fault mitigati ...

The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

Computational tools that accurately predict the performance of electric propulsion devices are highly desirable by NASA and the broader electric propulsion community. Large investments in running the long duration test programs (> 20 kHrs) at NASA GRC can be reduced with computer models and allow more focus on exploring the NEXT ion thruster design for future space missions. The current state of e ...

The ability to quickly and reliably simulate high-speed flows over a wide range of geometrically complex configurations is critical to many of NASA's missions. Advances in CFD methods and parallel computing have provided NASA the core flow solvers to perform these simulations. However, the ease of use of these flow solvers and the reliability of the results obtained are a strong function of the te ...

The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

The proposed innovation utilizes carbon nanotubes (CNTs) coated with pseudo-capacitive MnO2 material as nano-composite electrode and ionic electrolyte for the construction of ultracapacitors. This novel approach of using nano-structured CNTs architectures provides high surface area of attachment of MnO2 nano-particles to maximize the charge efficiency and power capacity and to reduce series resist ...

Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

This Small Business Innovation Research Phase I project is for the development of an asymmetric supercapacitor that will have improved energy density and cycle life. Supercapacitors that utilize an aqueous electrolyte are limited to a maximum voltage of 1 volt due to the decomposition of water. Methods used to increase voltage include use of an organic electrolyte, which introduces additional comp ...

The proposed innovation is the replacement of existing test stand and parking lot fixtures with current SSL LED technology. The replacement fixtures will reduce energy consumption, generate less heat and provide maintenance free operation for over 50,000 hours. An explosion-proof fixture is capable of containing an internal combustion event without allowing flames or hot gasses to escape to the s ...