You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) and Siemens PLM Software propose an integrated Automated Processing. Monitoring, Control and Remediation System (Aul) to provide a process monitoring and control capability. Made In Space, Inc. leads the effort based on integrating Made In Space, Inc., proven inspection sensors systems with a Digital Thread for Additive Manufacturing (DTAM) system, co-developed by Siemens ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Advanced Simulated Patient Intelligent Response Engine (ASPIRE)

    SBC: Vcom3D, Inc.            Topic: DHA191002

    The goal of medical simulation-based training such as high-fidelity manikin simulators, part task trainers, and screen-based virtual patients, is to approximate real-life treatment experiences without risk to live patients. While the use of sensors has ma

    SBIR Phase I 2019 Department of DefenseDefense Health Agency
  6. Algorithms for Look-down Infrared Target Exploitation

    SBC: Signature Research, Inc.            Topic: 1

    Signature Research, Inc. (SGR) and Michigan Technological University (MTU) propose a Phase I STTR effort to develop a learning algorithm which exploits the spatio-spectral characteristics inherent within IR imagery and motion imagery.Our archive of modelled and labeled data sets will allow our team to thoroughly capture the variable elements that will drive machine learning performance.The overall ...

    STTR Phase I 2018 Department of DefenseNational Geospatial-Intelligence Agency
  7. Anatomic 3D Synthetic Tissue Printer for Medical Training

    SBC: SERAPH ROBOTICS, INC.            Topic: DHP12003

    Military medical personnel are not prepared to provide trauma care to severely injured soldiers in wartime due to inadequate and unrealistic battlefield training opportunities during peacetime. Training has historically been done on human cadavers and live animals, but cadavers are in limited supply, and animal rights groups and physicians are increasing pressure to end the practice of using live ...

    SBIR Phase I 2013 Department of DefenseDefense Health Agency
  8. Asynchronous Multi-transmitter Multi-aperture Synthetic 3D Imaging System

    SBC: VOXTEL, INC.            Topic: NGA183001

    Traditional active 3D imaging systems, such as airborne and terrestrial lidar scanners, use a transmitter and receiver typically co-located on the same platform and connected in synchronous communications. However, recent advances in laser, detector, and airborne systems technology have opened the door to smaller, higher-performance and significantly lower-cost airborne lidar systems in which it i ...

    SBIR Phase I 2019 Department of DefenseNational Geospatial-Intelligence Agency
  9. Augmented Reality Surgical Visualization

    SBC: CFD Research Corporation            Topic: DHA191001

    Care for the wounded Warfighters in austere and remote settings makes medical knowledge, skills and efficiency of the military medical professional paramount. For wounds that extend deep into internal anatomy, proper visualization of internal anatomy can

    SBIR Phase I 2019 Department of DefenseDefense Health Agency
  10. A User-Centric Gamified Crowdsourcing System for Geospatial Analysts

    SBC: 361 Interactive, Llc            Topic: NGA191007

    Creating comprehensive geospatial datasets requires that National Geospatial Agency (NGA) analysts spend large amounts of time searching for, delineating, and labeling non-moving features in overhead imagery. This tiresome and tedious task can negatively impact not only the analysts’ work satisfaction but also the resulting data quality. Fortunately, recent advances in gamification and crowdsour ...

    SBIR Phase I 2019 Department of DefenseNational Geospatial-Intelligence Agency
US Flag An Official Website of the United States Government