You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: Geoplasma, LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: Senvol LLC            Topic: DLA18A001

    The Department of Defense (DoD) has a demand for out-of-production parts to maintain mission readiness of various weapons platforms. Additive manufacturing (AM) is an exciting and promising manufacturing technique that can make out-of-production parts and holds the potential to solve supply chain issues, such as high costs (i.e. for low-volume parts) and sole sourcing risks. The ability of AM to s ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Advanced Unsteady Turbulent Combustion Simulation Capability for Space Propulsion Systems

    SBC: STREAMLINE NUMERICS, INC.            Topic: T901

    The innovation proposed here is a high performance, high fidelity simulation capability to enable accurate, fast and robust simulation of unsteady turbulent, reacting flows involving cryogenic propellants (such as LOX/LH2 and LOX/LCH4). The key features of this proposed capability are: (a) Hybrid RANS-LES (HRLES) methodology, and (b) flamelet modeling for turbulent combustion incorporated in a pr ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: Research In Flight, LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  6. An Approach to Health Management and Sustainability for Critical Aircraft Systems

    SBC: Impact Technologies            Topic: T101

    Impact Technologies, in collaboration with the Georgia Institute of Technology and its industrial partners, proposes to develop and demonstrate innovative technologies to integrate anomaly detection and failure prognosis algorithms into automated fault mitigation strategies for advanced aircraft controls. Traditional reactive fault tolerant control approaches fail to provide optimal fault mitigati ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD Research Corporation            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Autonomous Navigation on Icy Moons and Ocean Worlds

    SBC: VETH RESEARCH ASSOCIATES LLC            Topic: T4

    Technology currently used for terrestrial navigation is extremely limited in the challenging environments on icy moons and ocean worlds such as Europa. Autonomous platforms used to collect data from beneath these ice and ocean surfaces cannot depend on access to satellite or any other electromagnetic communication. Autonomous systems in these environments are required to perform highly-complex tas ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  10. Braided Thin-Ply Tapes

    SBC: Opterus Research and Development, Inc.            Topic: T12

    Opterus proposes to develop braided thin ply composite tapes. The tapes will be braided from ultra-thin spread-tow unidirectional carbon and glass ribbons and will enable a new source and form factor for thin-ply textiles. The resulting tapes will be especially useful for thin high strain composite space deployable structures where they will allow bias plies in long parts without requiring seams. ...

    STTR Phase I 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government