You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Wearable Blast Wave Sensing System for In-Air and Underwater Explosions

    SBC: ADVANCED MATERIALS AND DEVICES            Topic: DHA17C002

    The goal of this STTR Phase II project is to produce a wearable device with the capability to sense and record blast waves from in-air and underwater explosions. The flexible piezoelectric film-based sensor that was identified as an accurate sensing eleme

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  2. Combat-Casualty Handoff Automated Trainer (C-CHAT) System

    SBC: SOAR TECHNOLOGY, INC.            Topic: DHA17B001

    Combat casualty handoffs are critical communication moments during which responsibility for the patient and important casualty information is transferred between providers. The nature of these handoffs requires specialized training, for which no standardi

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  3. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed.Process optimizations will be conducted ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  4. Highly Sensitive Flash LADAR Camera

    SBC: VOXTEL, INC.            Topic: T9

    To address the urgent need for 3D flash-lidar technology for landing on solar system bodies and for spacecraft rendezvous and docking with satellites, an effort is proposed to fabricate, characterize, and test a versatile, high-sensitivity InGaAs APD 3D flash lidar and to advance the technology-readiness level (TRL) of lidar technologies suitable for NASA mission requirements. Leveraging an existi ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  5. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  6. Oxygen Production and Delivery on Demand

    SBC: Global Research and Development Inc.            Topic: DHA17B005

    This Phase II proposal is in response to the Defense Health Agency 2017 SBIR topic 17B-005. The approach is an electrochemical membrane oxygen pump using newly developed nano-thickness membrane technology. The total membrane with all the layers is less

    STTR Phase II 2019 Department of DefenseDefense Health Agency
  7. High Density Hybrid Motors

    SBC: Terves Inc.            Topic: T1

    This STTR program will mature high density, high regression rate hybrid rocket motor technology through TRL6 through the design, fabrication, and testing of third and fourth stage nanosatellite motors, while preparing designs and sizing for booster stages.nbsp; Hybrid Rockets offer substantially lower cost compared to storable and cryogenic bipropellant systems, but currently suffer from poor pack ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  8. Vision-Based Navigation for Formation Flight onboard ISS

    SBC: Jaycon Systems LLC            Topic: T11

    The proposed Phase II supports completion of the RINGS science missions on ISS using SVGS as real-time sensor for the EMFF maneuver. During Phase I, SVGS-based navigation of RINGS was developed and tested on a 3DOF ground-based platform, and mechanical and electrical integration of RINGS with the free-flying robotic platforms on ISS (Astrobee) was designed in detail. SVGS was deployed and tested o ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  9. Principled Design of an Augmented Reality Trainer for Medics

    SBC: Unveil LLC            Topic: DHP17A003

    Augmented reality (AR) offers the ability to enhance existing combat medic training by including perceptual cues and adaptive training elements to traditional simulation-based training using manikins. Unveil has developed a training system called the Macrocognitive AR Trainer (MART). MART is designed to foster the development of macrocognitive skills (e.g., sensemaking, assessment skills, mental m ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
  10. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to reflec ...

    STTR Phase II 2018 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government