You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Computerized Robotic Delayering and Polishing System
SBC: SPECTRAL ENERGIES LLC Topic: DMEA18B001The proposed research and technical objectives in this project deal with computerized automatic delayering and polishing system that would be applicable to both commercial and government semiconductor device research and development with applications including Failure Analysis (FA), Fault Isolation (FI), and Reverse Engineering (RE) of semiconductor microelectronic devices. This project could hel ...
STTR Phase I 2019 Department of DefenseDefense Microelectronics Activity -
Advanced Command and Control Architectures for Autonomous Sensing
SBC: LAMBDA SCIENCE, INC. Topic: N18BT030xxx
STTR Phase I 2019 Department of DefenseNavy -
Out-of-Oven Aerospace Composites
SBC: CORNERSTONE RESEARCH GROUP INC Topic: N18BT031Large aerospace composite structures currently require autoclaves and ovens to achieve desired performance which are expensive to purchase, costly to operate, and often limit part size and production rate. Ovens and autoclaves rely on convective heating which is inefficient, consumes large amounts of energy, and can be difficult to predict. Alternative cure processes using external heaters or hot ...
STTR Phase I 2019 Department of DefenseNavy -
Carbon Nanotube-Based Heater Coatings for Processing of Thermosetting and Thermoplastic Composites
SBC: MAINSTREAM ENGINEERING CORP Topic: N18BT031For this research program, Mainstream will collaborate with Colorado State University (CSU) to develop a nanostructured heater capable of curing aerospace grade composites out-of-autoclave (OOA). The use of autoclaves is the primary cost driver in composite manufacturing due to size limitations, long processing times, and inefficient energy usage. Therefore, the Navy is looking to develop a nanost ...
STTR Phase I 2019 Department of DefenseNavy -
Enhanced Sensor Resource Management Utilizing Bayesian Inference
SBC: LAMBDA SCIENCE, INC. Topic: N19AT002xxx
STTR Phase I 2019 Department of DefenseNavy -
Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring
SBC: HARP ENGINEERING LLC Topic: N19AT003The performance of a composite material is heavily influenced by the strength and toughness of the interlaminar region, which is the resin rich area between the plies of a fiber reinforced composite. The interlaminar region generally provides a direct path for crack propagation since no continuous reinforcement is present and is often the cause of failure in materials subjected to cyclic loading s ...
STTR Phase I 2019 Department of DefenseNavy -
Process to Mitigate Catastrophic Optical Damage to Quantum Cascade Lasers
SBC: IRGLARE LLC Topic: N19AT004The development of a catastrophic optical damage model for quantum cascade lasers describing instantaneous laser damage at high optical power levels is proposed. The model will be validated by comparison to experimental data. Based on obtained results, changes to laser design and laser fabrication resulting in an increased damage threshold will be implemented. The work will ultimately result into ...
STTR Phase I 2019 Department of DefenseNavy -
Power-Dense Electrical Rotating Machines for Propulsion and Power Generation
SBC: CONTINUOUS SOLUTIONS LLC Topic: N19AT007The primary objective is to develop electric machine/drive topologies and power architectures that achieve the power densities required for 50% more power without the increase in weight or space requirements. In addition to PMSM-based designs, two new machine topologies will be considered. The first is a trapped flux coreless (TFC) machine that utilizes superconducting pucks made of YBCO to produc ...
STTR Phase I 2019 Department of DefenseNavy -
Homopolar AC Electric Machines for Naval Applications
SBC: McCoy Consulting, LLC Topic: N19AT007The objective of this proposed effort is to increase the power and torque density of rotating electric machinery for Naval applications by up to 50%. This aggressive goal will be achieved by developing the novel homopolar AC machine (HAM) topology. This relatively un-studied topology relies on solenoidal field and armature coils, making manufacturing simpler than traditional machines. The HAM elim ...
STTR Phase I 2019 Department of DefenseNavy -
GECCO: Gecko-gripper for EOD with Cavitation Cleaning Operation
SBC: VALOR ROBOTICS, LLC Topic: N19AT011The objective of the Phase I proposal is to investigate the application of controlled cavitation cleaning technology in conjunction with gecko-inspired mechanical adhesion and soft elastomeric applicators for use in non-intrusive EOD operations. This investigation requires the proof-of-concept testing and validation of a controlled cavitation cleaning mechanism, and a soft robotic gecko-inspired m ...
STTR Phase I 2019 Department of DefenseNavy