Award Data

Additive manufacturing is a disruptive new manufacturing paradigm that hold tremendous potential for creation of novel designs and introduction of novel new alloy systems. However, much of this potential remains unrealized due to a lack of robust material properties databases. Accurate calibration of materials models and robust part qualification and certification regimes both will require massive ...

The proposed program will develop dielectrics for dc superconducting power transmission cables that are cooled with cryogenic helium gas. The Dielectrics will be sealed again helium gas penetration and allow for an operating voltage of 12 kV in a pressure of 2 MPa at 50 K. The dielectrics will be designed for use with all helium facing components of power transmission systems based on CORC cables. ...

xß-Ga2O3 has emerged as a potentially disruptive semiconductor with a predicted breakdown field of ~8 MV/cm which is more than twice the breakdown field for the incumbent wide bandgap semiconductors GaN and SiC. The availability of ß-Ga2O3 bulk substrates sets this material apart from other wide bandgap materials for power electronic applications. However, the challenge is to find suitable epita ...

The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms’ networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the proce ...

The technical objectives of this proposal are: 1) demonstrate a single-element, 4.6 micron-emitting quantum-cascade-laser (QCL) with > 40 % continuous-wave (CW) wallplug efficiency (WPE) at room temperature; (2) perform a comprehensive simulation to achieve a design for a monolithic QCL operating in a single spatial mode to 10 W CW output power; 3) perform a thermal-management analysis for the des ...

An advanced hit detection technology is needed for MDA that can report impacts at hyper-velocities and at multiple hit locations. We present a technology with a high level of performance that leverages decades of hit technology experience and utilizes existing technologies developed under previous efforts. Our technology offers a low latency non-interpolated direct indicator of multiple hit locati ...

Optically pumped magnetometers provide very high performance but they cost tens of thousands of dollars, and they are large and power hungry. Recently we successfully developed and commercialized laser pumped magnetometers with size, weight and power consumption that is an order of magnitude below current state-of-the-art without sacrificing performance. In this project, the focus will be on produ ...

Automatic Speech Recognition (ASR) allows trainees to practice verbal communication skills in representative training environments without the need for human role players. However, these technologies have yet to become a feature of most training systems. Building on Phase I work, SoarTech along with our academic partners at UC Davis, proposes developing Soliloquy, a novel interface that allows non ...

Nanoscale, material sensitive, imaging techniques are critical for progress in many disciplines as we learn to master science and technology at the smallest dimensions — on the nanometer to atomic-scale. However, progress in both science and technology is becoming increasingly limited by the constraints of current imaging techniques and metrologies. Fortunately, by combining coherent extreme UV ...

The problem addressed in this effort is to automatically learn historical ephemeris space catalog time, position, and velocity entity track update error uncertainties (i.e., without track error covariances) and to automatically (e.g., without expert event labeling) produce: – unmodeled non-gravitational space catalog update flags – abnormal unmodeled catalog update flags with abnorma ...