You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: AF112057

    ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Open Data Distribution Service (DDS) for use in a real time simulation laboratory environment

    SBC: Object Computing, Inc.            Topic: N08116

    The purpose of this agreement is to expand OpenDDS to be usable by all FACE application developers.OpenDDS is an open source native C++ implementation of the Object Management Group (OMG)Data Distribution Service for Real-time Systems Specification. It is also available wrapped for Java use. DDS defines a strongly typed publish-subscribe service for efficiently distributing application data betwee ...

    SBIR Phase II 2015 Department of DefenseNavy
  3. Reduced-Order Model for the Prediction of Supersonic Aircraft Jet Noise

    SBC: INNOVATIVE TECH APPLICATIONS LLC            Topic: AF151065

    ABSTRACT:Innovative Technology Applications Company, LLC proposes the development of an analytical tool that predicts jet noise and engine performance for current and future generations of supersonic two- and three-stream engines. The goal is to provide robust and reliable noise predictions in minutes that can be used for design optimization. The physics-based approach will be capable of addressin ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. High Power Density Structural Heat Spreader

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: AF151094

    ABSTRACT:The proposed research effort will develop passive Oscillating Heat Pipe (OHP) structural heat spreaders to attach to small, ultra-high heat flux devices (e.g., GaN power amplifiers) and dissipate their heat loads uniformly across the spreaders' relatively large heat sinking surfaces - and do so with minimal thermal resistance. The research team will design, model, fabricate, test, and ana ...

    SBIR Phase I 2015 Department of DefenseAir Force
  5. Smart GaN-Based Inverters for Grid-tied Energy Storage Systems

    SBC: INNOCIT LLC            Topic: 10b

    Battery storage systems are the backbone of the future gird systems. These systems provide distributed energy storage capabilities for smoothening the load profile and coping with generation and load power fluctuations. By incorporating these resources into the electrical grid, voltage stability and overall reliability of the grid will improve. Furthermore, these resources compensate for fluctuati ...

    SBIR Phase I 2015 Department of Energy
  6. VIIRS DNB HGS Radiometric Calibration Source

    SBC: INNOVATIVE IMAGING & RESEARCH CORP            Topic: 843D

    A new radiometric vicarious calibration approach for the Suomi NPP VIIRS Day/Night Band’s (DNB) high gain stage (HGS) is proposed that will complement traditional, extended source, radiance-based calibrations, which are based on natural lunar illumination and not as accurate as desired. The proposed research will produce affordable, field-deployable, NIST-traceable point source lamps that can ac ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Development of Iron Phosphate Waste Forms for Fission Products Waste Streams

    SBC: MO-SCI Corp.            Topic: 19g

    Most liquid high-level nuclear waste is currently being immobilized to a solid form as a borosilicate glass by vitrification. However, many nuclear wastes have complex and diverse chemical compositions that reduce their compatibility with borosilicate glass. The current baseline spent nuclear fuel reprocess generates secondary waste streams that generally include large amounts of MoO3 and noble me ...

    SBIR Phase II 2015 Department of Energy
  8. High Power X-ray Munition to Attack and Defeat Weapons of Mass Destruction

    SBC: HYPERION TECHNOLOGY GROUP INC            Topic: DTRA143004

    The overall objective of this Phase I effort is to determine the feasibility of defeating CBW production facilities via an X-ray source that would fit within the volume constraints of a munition platform. First, Battelle will conduct a system trade study focused on determining the key performance requirements of an X-ray source suitable for use against CBW and C4 complexes, identify the input requ ...

    SBIR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
  9. Radiolytic Atomic Cell for Long-lived Sensors

    SBC: INFINITY POWER LLC            Topic: A15018

    Heavy power sources with short lifetimes have been significant obstacles to realizing the full potential of various miniaturized electrical and mechanical systems developed in the recent, remarkable growth of micro/nanotechnology. In contrast to conventional power sources, a radioisotope power source can operate for extended periods of time and in extreme environments. More importantly, the energy ...

    SBIR Phase I 2015 Department of DefenseArmy
  10. Efficient shaping or reshaping of complex 3D parts using engineered residual stress

    SBC: Engineering Software Research And Development, Inc.            Topic: AF141170

    ABSTRACT:Increasing emphasis on affordability of military systems has led to a number of advances in airframe production. For example, high speed machining (HSM) has made it possible to fabricate thin structures that provide improved performance. However, near-surface plastic strains induced by HSM or surface treatments can lead to excessive component distortion such that the component requires re ...

    SBIR Phase II 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government