List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. RAMAN COVERTED MID-IR LASER

    SBC: ABIOMED, INC.            Topic: N/A

    THE OBJECTIVE OF THIS PROPOSAL IS THE DEVELOPMENT OF A PULSED MID-IR LASER IN THE 3.5 TO 4.1 MICROMETER ATMOSPHERIC TRANSMISSION WINDOW. SUCH SPECTRAL SOURCE IS RELEVANT TO A VARIETY OF TACTICAL APPLICATIONS. THE DF CHEMICAL LASER HAS BEEN THE CHOICE, BUT SUFFERS FROM WASTE FUEL MANAGEMENT PROBLEMS. NO OTHER EFFICIENT DIRECT LASING SOURCE IS AVAILABLE. TO OBTAIN SUCH A SOURCE, WE PROPOSE THE USE O ...

    SBIR Phase II 1986 Department of DefenseArmy
  2. LOW FLYING AIRCRAFT CANNOT BE DETECTED BY STANDARD RADAR BECAUSE OF INTERFERENCE FROM CLUTTER.

    SBC: Active E-o Systems Inc            Topic: N/A

    LOW FLYING AIRCRAFT CANNOT BE DETECTED BY STANDARD RADAR BECAUSE OF INTERFERENCE FROM CLUTTER. THIS PROPOSAL DESCRIBES A COHERENT LASER RADAR SYSTEM APPROACH, CONSISTING OF 2 KM SPACED LASER RADAR SITES THAT SCAN THE SKY IN ELEVATION ANGLE, WHICH CAN DETECT AIRCRAFT BETWEEN THE HORIZON AND 300 METER ALTITUDE. EACH SITE WILL BE BATTERY POWERED AND INTERCONNECTED BY A FIBEROPTIC LOCAL AREA NETWORK T ...

    SBIR Phase I 1986 Department of DefenseAir Force
  3. TOUGH THERMOPLASTIC COMPOSITE BRIDGE DECK DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    THE OBJECTIVE OF THIS EFFORT IS TO DEVELOP A MANUFACTURING PROCESS AND SAMPLE HARDWARE FOR A LIGHTWEIGHT, TOUGH COMPOSITE CLASS 70 TRIARCH BRIDGE DECK. CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITES (TPC) ARE WELL SUITED TO THIS APPLICATION BECAUSE THEY OFFER REDUCED WEIGHT, IMPROVED IMPACT DAMAGE TOLERANCE, LOW CORROSION POTENTIAL, AND ARE SUITED FOR HIGH VOLUME MANUFACTURING METHODS. AFTER ...

    SBIR Phase II 1986 Department of DefenseArmy
  4. CONTINUOUS HEATED ROLL FORMING OF THERMOPLASTIC COMPOSITE MATERIALS DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    THE OBJECTIVE OF THIS PROGRAM IS TO DEVELOP A CONTINUOUS PRODUCTION METHOD BASED ON THE USE OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITE MATERIAL. HEATED ROLL FORMING (HRF), AN ADAPTATION OF THE METAL ROLL FORMING PROCESS, IS TO BE USED BECAUSE OF ITS ABILITY TO PRODUCE A VERY BROAD RANGE OF SHAPES, SIZES, AND MATERIALS IN HIGH VOLUME AND THEREFORE LOW UNIT COST. THE APPROACH TO HRF PROC ...

    SBIR Phase II 1986 Department of DefenseAir Force
  5. DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    THERMOPLASTIC COMPOSITE MATERIALS SUCH AS GRAPHITE/PPS OFFER THE POTENTIAL TO REDUCE WEIGHT AND ENVIRONMENTAL CORROSION IN MILITARY BOMB RACKS. THIS PROGRAM IS DESIGNED TO APPLY THOSE BENEFITS TO THE MAU-12 AIRCRAFT BOMB EJECTOR RACK ASSEMBLY. AFTER A REVIEW OF AVAILABLE DATA, SEVERAL METAL COMPONENTS OF THE EXISTING BOMB RACK WILL BE SELECTED FOR COMPOSITE DESIGN. ONE OF THESE WILL BE BUILT AND T ...

    SBIR Phase I 1986 Department of DefenseAir Force
  6. AIRCRAFT STRUCTURE

    SBC: Advanced Composite Products            Topic: N/A

    THE OBJECTIVE OF THIS EFFORT IS TO DEMONSTRATE THE FEASIBILITY OF USING A "HYBRID YARN" CONSISTING OF A MIXTURE OF GRAPHITE AND THERMOPLASTIC FILAMENTS TO FABRICATE A PRIMARY STRUCTURAL COMPONENT TYPICAL OF CURRENT AND FUTURE ARMY COMPOSITE AIRFRAME STRUCTURES. THE RESULTING THERMOPLASTIC MATRIX COMPOSITE MATERIAL IS ANTICIPATED TO HAVE THE SAME IMPROVEMENTS IN TOUGHNESS AND REPAIRABILITY THAT CHA ...

    SBIR Phase I 1986 Department of DefenseArmy
  7. LIGHTWEIGHT DURABLE THERMOPLASTIC SANDWICH PANEL ROADWAY SURFACE FOR MILITARY BRIDGE BITE ACCESS/EGRESS DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseArmy
  8. MATERIAL AND PROCESS DEVELOPMENT OF NOVEL GRAPHITE/THERMOPLASTIC YARN AND RELATED FORMS

    SBC: Advanced Composite Products            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  9. ADVANCED COMPOSITES LABORATORIES WILL DEVELOP AN IMPROVED MOUNTAINEERING SKI FOR MILITARY USE.

    SBC: Advanced Composites Labs            Topic: N/A

    ADVANCED COMPOSITES LABORATORIES WILL DEVELOP AN IMPROVED MOUNTAINEERING SKI FOR MILITARY USE. WE WILL INCORPORATE THE BEST OF DOWNHILL SKI TECHNOLOGY WITH THE BEST OF TELE MARK AND MOUNTAINEERING SKI TECHNOLOGY TO PRODUCE A SKI FOR THE US MARINE CORPS WHICH WILL MEET THE REQUIREMENTS OF THE MARINE CORPS TOICS N86-13. WE WILL USE ADVANCED COMPOSITE MATERIALS TO ALLOW US TO PROVIDE A HIGH PERFORMAN ...

    SBIR Phase I 1986 Department of DefenseNavy
  10. BEHAVIOR OF METAL MATRIX COMPOSITES AT CRYOGENIC TEMPERATURES

    SBC: Advanced Materials Laboratory            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government