You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Production Methods and Software for NIST Calibration Phantoms

    SBC: SIGMA K CORP            Topic: 9050868TT

    Currently, there are over 10,000 MRI scanners used in the US alone. US citizens today are mobile and many times medical treatments may require MRI scans from several different facilities. Images from MRI scanners can also drift over time. There is a tremendous need for all medical imaging scanners to be on the same level. Sigma-K will develop the commercialization of the ISMRM/NIST MRI Calibration ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  2. 3D Tip Characterization and Surface Reconstruction

    SBC: Nanometrology International, Inc.            Topic: 9070168TT

    Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  3. An Integrated Decision Support Framework for Sustainability CAE

    SBC: BIMCON Inc.            Topic: 9050273R

    The objective of this proposal is to establish the feasibility of developing an integrated decision support framework that transforms the current time-consuming and reactive (post completion of final design) sustainability assessment into a proactive CAE approach that enables the ability to revise designs based on performance against selected sustainability targets in the product design process, i ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: 907012R

    Our vision is that of an integrated decision support solution that transforms the current time-consuming and reactive (post-design) sustainability assessment of a product into a proactive approach available in the early design phases. This solution called Sustainability Integrated into Early Design (SIED) will deliver lifecycle sustainability data into early design processes and focus primarily on ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  5. Analysis of New WWVB Modulation Schemes for Future Broadcast

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  6. Non-Invasive Detection, Differentiation, Diagnosis and Treatment of Balance Pathologies

    SBC: Control-X LLC            Topic: OSD10H02

    Control-X proposes the development of a highly specific device that integrates several classical approaches to study of vestibular, visual, and balance disorders for the detection and treatment of secondary pathologies resulting from concussion or mild tr

    SBIR Phase I 2011 Department of DefenseDefense Health Program
  7. Spatiotemporally Controlled Keratin Biomaterial Delivery System for Functional Tissue Regeneration

    SBC: Keranetics, LLC            Topic: OSD10H03

    A principal approach in regenerative medicine is to stimulate or augment endogenous repair mechanisms that promote functional restoration of damaged or diseased tissues. When loss of significant volumes of multiple functionally integrated tissues occurs,

    SBIR Phase I 2011 Department of DefenseDefense Health Program
  8. Technologies for Treating Cartilage Tissue Loss Following Traumatic Injury

    SBC: Spheringenics, Inc.            Topic: OSD10H04

    Regeneration of cartilage and cartilage repair are challenging due to limited cellularity of the tissue and the failure of allografts and tissue engineered cartilage constructs to integrate with host tissue. To overcome this limitation, many surgeons are

    SBIR Phase I 2011 Department of DefenseDefense Health Program
  9. Deployed First Responder Course of Action (COA) Evaluation and After Action Review (AAR) Tools

    SBC: Cognitive Performance Group of Florida            Topic: OSD10H07

    Humanitarian organizations hold the same objectives: to save lives, alleviate suffering, and maintain human dignity. Humanitarian organizations large and small respond in numbers to large-scale disasters such as Hurricane Katrina or the devastation in Ha

    SBIR Phase I 2011 Department of DefenseDefense Health Program
  10. Serious Game for Continuity of Care Training

    SBC: Vcom3D, Inc.            Topic: OSD10H08

    For this Phase I SBIR, Vcom3D will design a Web-based medical game for the development of the cognitive skills required to provide highest quality of care from far-forward locations through evacuation to level 1 trauma facilities. The training will empha

    SBIR Phase I 2011 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government