You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. RESEARCH TO INVESTIGATE THE POTENTIALS OF ABRASION JET IN TRANSPORT SYSTEMS CONSTRUCTION

    SBC: Fluidyne Corp            Topic: N/A

    HIGH-PRESSURE WATERJET IS ONE OF SEVERAL NEW METHODS FOR CUTTING MATERIALS DEVELOPED DURING THE LAST DECADE. CURRENTLY IT IS USED, AT STATIC WATER PRESSURE UP TO 60,000 PSI, TO CUT A WIDE VARIETY OF SOFT AND MEDIUM-HARD MATERIALS IN FACTORIES; IT HAS BEEN EVALUATED FOR GEOTECHNICAL APPLICATIONS WITH VERY LIMITED SUCCESS. THIS RESEARCH CONCERNS THE USE OF ABRASIVE-ENTRAINED WATERJET FOR CUTTING AND ...

    SBIR Phase II 1985 Department of Transportation
  2. LABORATORY INVESTIGATION OF ATMOSPHERIC EFFECTS ON VORTEX WAKES

    SBC: Flow Research Inc            Topic: N/A

    LABORATORY EXPERIMENTS CONDUCTED IN A STRATIFIED TOW TANK ARE PROPOSED TO CHARACTERIZE VORTEX WAKES UNDER THE INFLUENCE OF ATOMOSPHERIC DISTURBANCE. FLOW RESEARCH HAS DEVELOPED INNOVATIVE TECHNIQUES FOR STRATIFYING THE FLUID IN THE TANK, GENERATING A CURRENT SHEAR AND CREATING AMBIENTTURBULENCE WITH GOOD CONTROL. SUCH CAPABILITIES WOULD FACILITATE THE ISOLATION OF THE EFFECTS OF THE DISTURBANCE S ...

    SBIR Phase II 1987 Department of Transportation
  3. A NEW MAGNETO-OPTIC BASED FLAW IMAGING DEVICE FOR UNDERWATERAPPLICATION

    SBC: Sigma Research Corp            Topic: N/A

    THE PHASE I RESEARCH IS INTENDEDTO DEMONSTRATE THE BASIC FEASIBILITY OF CONSTRUCTING AND OPTIMIZING A NEW MAGNETO-OPTIC 'SANDWICH' DEVICE INTENDED FOR DIRECT VISUALIZATION OF FLAWSIN FERROUS MATERIALS (STEEL) IN A MARINE ENVIRONMENT. THE DEVICE IS BASED IN THE PROPERTY OF SOME MAGNETO-OPTIC GARNETFILMS TO ROTATE THE PLANES OF POLARIZATION OF AN INCIDENT, LINEARLY POLARIZED LIGHT WAVE (FARADAY MAGN ...

    SBIR Phase II 1987 Department of Transportation
  4. STOCHASTIC MODELING OF ANTISYMMETRIC BUFFET LOADS ON HORIZONTAL STABILIZERS

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    N/A

    SBIR Phase II 1995 Department of Transportation
  5. EMBEDDED PAVEMENT STRESS SENSORS CONTAINING PIEZOELECTRIC COMPOSITES

    SBC: Fiber Materials, Inc.            Topic: N/A

    FIBER MATERIALS, INC. (FMI) PROPOSES SENSORS WHICH CAN BE EMBEDDED IN PAVEMENT TO MEASURE STRESS AND STRAIN FROM TRUCKS PASSING OVER AT SPEEDS UP TO 60 MPH. THESE SIMPLE, DURABLE SENSORS WILL BE MADE FROM PIEZOELECTRIC COMPOSITES WHICH ACT AS PASSIVE SENSORS AND DEVELOP A CHARGE PROPORTIONAL TO THE APPLIED PRESSURE. THE CHARGE IS CONVERTED TO A VOLTAGE WHICH IS RECORDED ON NEARBY EQUIPMENT. THE PH ...

    SBIR Phase II 1995 Department of Transportation
  6. DETECTION AND QUANTIFICATION OF SUBSURFACE CORROSION USING IMPROVED MAGNETO-OPTIC/EDDY-CURRENT IMAGING AND IMAGE PROCESSING

    SBC: PHYSICAL RESEARCH, INC.            Topic: N/A

    NONDESTRUCTIVE INSPECTION FOR CORROSION IN ALUMINUM AIRCRAFT STRUCTURES OF AGING AIRPLANES HAS BEEN DEMONSTRATED RECENTLY USING MAGNETO-OPTIC/EDDY CURRENT IMAGING TECHNOLOGY. THIS TECHNOLOGY WAS DEVELOPED FOR RAPID INSPECTION OF SURFACE BREAKING CRACKS NEAR RIVETS IN ALUMINUM AIRCRAFT ALLOYS, BUT HAS BEEN SHOWN TO BE CAPABLE OF GENERATING IMAGES OF CORRODED REGIONS AS WELL. DEVELOPMENT OF A CORROS ...

    SBIR Phase II 1995 Department of Transportation
US Flag An Official Website of the United States Government