Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. GPS-BASED AUTONOMOUS SPACE NAVIGATION

    SBC: Arrowsmith Technologies Inc            Topic: N/A

    COMMERCIAL AND GOVERNMENT SPACE TRANSPORTATION SYSTEMS DEPEND ON GROUND SUPPORT FOR NAVIGATION. THE GROUND SOLUTION CAN BE COSTLY AND MAY PROVIDE LESS ACCURACY THAN NEEDED. A GPS-BASED REAL-TIME AUTONOMOUS SPACECRAFT NAVIGATION SYSTEM IS PROPOSED. AN ALGORITHM WILL BE DEVELOPED WHICH COMBINES GPS-DERIVED POINT POSITION ESTIMATES WITH A PROPAGATED A PRIORI POSITION ESTIMATE. THE POINT POSITIONS ARE ...

    SBIR Phase I 1992 Department of Transportation
  2. STRUCTURES

    SBC: Invocon Consultants            Topic: N/A

    A NEED EXISTS TO MONITOR VIBRATION IN HIGHWAY BRIDGES. IT IS DESIRABLE TO MONITOR MANY POINTS ON THE BRIDGE. THE CURRENT PROBLEM IS THAT SENSORS MUST BE WIRED TO A CENTRAL LOCATION. WIRE IS DIFFICULT TO INSTALL AND TO MOVE. THE SOLUTION IS TO COLLECT SENSOR DATA BY RADIO. A SYSTEM EXISTS THAT ELIMINATES WIRE. IT GATHERS SENSOR DATA TO A CENTRAL LOCATION BY RADIO. THE SYSTEM'S UNIQUE FEATURE IS THA ...

    SBIR Phase II 1992 Department of Transportation
  3. INNOVATIVE FIRE RESISTANT ("FIREPROOFING") COATINGS FOR USE ON COMPOSITE PRODUCTS ABOARD U.S. COMMERCIAL SHIPS

    SBC: Omega Point Laboratorytorie            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  4. NONDESTRUCTIVE TESTING OF DRILLED SHAFTS USING PATTERN RECOGNITION

    SBC: Stress Eng Services, Inc            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  5. THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS

    SBC: Eskay Assoc.            Topic: N/A

    THERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...

    SBIR Phase I 1992 Department of DefenseArmy
  6. ELECTRO-MECHANICAL (EM) ACTUATOR DRIVER

    SBC: Advanced Motion Controls Inc.            Topic: N/A

    THE PROJECT WILL DEVELOP A NOVEL MINIATURE PULSE WIDTH MODULATED POWER DRIVER FOR ACTUATORS, I.E. DC MOTOR. THE POWER DRIVER WILL DELIVER 50 AT 50VDO IN A DOUBLE INON PACKAGE. THIS COMPACT DESIGN CAN ONLY BE ACHIEVED THROUGH THE INNOVATIVE COMBINATION OF MODER POWER SEMICONDUCTOR TECHNOLOGIES, PROPRIETORY CIRCUIT DESIGN, AND STATE-OF-THE-ART PACKAGING TECHNOLOGY WHICH UTILIZES NEW HEAT CONDUCTIVE ...

    SBIR Phase II 1992 Department of DefenseArmy
  7. Identification of Microbially Influenced Corrosion

    SBC: Bioindustrial Technologies, In            Topic: N/A

    Microbiologically influenced corrosion (MIC) of most industrially utilized alloys, including those used in many Naval installations, is well established. However, the diagnosis of MIC type corrosion is often difficult to make using the techniques commonly employed requiring large amounts of tiem and money and "expert opinion". Ther is a need for a less subjective indicator of MIC. The work of seve ...

    SBIR Phase I 1992 Department of DefenseNavy
  8. BIOLOGICAL PRODUCTION OF 4-HYDROXYBENZOCYCLOBUTENE

    SBC: Bio-technical Resources, L.p.            Topic: N/A

    APPLICATION OF BIOTECHNOLOGY TO THE PRODUCTION OF 4-HYDROXYBENZOCYCLOBUTENE WILL ALLOW BULK MANUFACTURE OF THIS POLYMER PRECURSOR BY MORE ECONOMICAL MEANS THAN IS CURRENTLY AVAILABLE. DEVELOPMENT OF SUCH A PROCESS WOULD ALLOW INDUSTRIAL APPLICATIONS OF BCB-BASED POLYMER MATERIALS.

    SBIR Phase II 1992 Department of DefenseAir Force
  9. OPTIMIZED PRODUCTION OF BACTERIAL AGENT-DEGRADING ENZYMES

    SBC: Bio-technical Resources, L.p.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseArmy
  10. TRANSCUTANEOUS ANALYTE MEASURING METHODS (TAMM)

    SBC: Biotronics Technologies, Inc.            Topic: N/A

    TAMM RELATES TO TWO TECHNOLOGIES FOR NONINVASIVE TRANSCUTANEOUS MEASUREMENTS OF BLOOD ANALYTES THAT HAVE POTENTIAL FOR APPLICATION IN A COMBAT CASUALTY CARE ENVIRONMENT. THE NEAR INFRARED (NIR) REFLECTANCE TECHNOLOGY DETERMINES BLOOD ANALYTE CONCENTRATION BASED ON DIFFUSE REFLECTANCE MEASUREMENTS WITH A FIBER OPTIC PROBE. SPECTRAL DATA ACQUIRED IS PROCESSED USING SOPHISTICATED PATTERN RECOGNITION ...

    SBIR Phase II 1992 Department of DefenseNavy
US Flag An Official Website of the United States Government