Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. High Performance Piezoceramic Coatings for Ultrasound Applications

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. HLA Federation Implementation Tools

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: N/A

    The Defense Modeling and Simulation Office (DMSO) has developed the High Level Architecture (HLA) as one of the principle components of a DoD-wide Common Technical Framework for modeling and simulation (M&S). Unlike previous distributed simulation technologies such as DIS and SIMNET, HLA provides federation developers, via the Object Model Template (OMT), the means to define the structure and for ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Hand Held High Resolution Imagin Devices for Aircraft Substructures

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will evaluate two approaches, millimeter waves and opto-acoustics, for locating edges and holes in substructure that are hidden under exterior panels and skins during aircraft assembly. These devices will work in a camera-like fashion to allow non-destructive remote imaging. Eikos has developed promising approaches to both techniques that have the potential to be low cost and easy to u ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  5. TOS Enhanced Phthalonitrile Resins with MDC Composite Stitching Technology

    SBC: Eikos, Inc.            Topic: N/A

    Eikos LLC will modify and enhance the chemistry of the NRL developed phthalonitrile resin to meet the 700F TOS requirements of high temperature RTM and RFI aerospace composites. Eikos is intimately familiar with the chemistry of the phthalonitrile resin because of our efforts to scale the production of the current bases resin from the laboratory to the pilot plant. Eikos has teamed with McConne ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Liquid Crystal-Based Underwater Imager

    SBC: EMPIRICAL TECHNOLOGIES CORPORATION            Topic: N/A

    The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. MiniMOP (Miniature Multipurpose Optical Pod)

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    The following proposal describes an affordable modular sensor system which can be used for tactical oceanography. The system, referred to as MiniMOP (Miniature Multipurpose Optical Pod) is teh integrated sensor package capable of measures fluorometry, luminometry, transmissiometer, salinity, tempature and water depth. The sensor package will remain module for mounting in any small AUV but develo ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. Parallel Optical Memory Interconnects

    SBC: LSA            Topic: N/A

    In this proposal, we describe a novel approach for realizing a parallel, nonmechical, read/write interconnection for angle-multiplexed three-dimensional (3-D) optical memories. Our concept represents a significant first step required toward taking this critical memory technology from the laboratory and inserting it into operational systems. The concept utilizes novel optomechanical packaging and ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  9. Integrating HLA into the Spearhead Game

    SBC: MAK TECHNOLOGIES            Topic: N/A

    To promote the commercial use of HLA outisde the DoD, non-military applications must be fielded which clearly demonstrate the benefits of HLA over and above other network architectures. MaK Technologies is the world's leading supplier of DIS software, and is the first company toproduce a commercial product based on HLA (VR-Link++). MaK will integrate VR-Link++ with MaK's completed, state-of-the- ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. A Runtime Analysis and Monitoring Tool Suite

    SBC: MAK TECHNOLOGIES            Topic: N/A

    The increasing number and complexity of HLA-based distributed simulation exercises has created an urgent need for a suite of commercially-supported HLA Runtime Analysis and Monitoring (RAM) tools. These tools must provide a clear, accurate and timely view into the dynamic virtual battlefield and its supporting infrastructure while also providing supervisory control of all federates. Mak Technolo ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government