You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reactor for Control of Fugitive Emissions of Toxic Gases

    SBC: Coyote Aerospace/high Mesa            Topic: N/A

    A need to control the fugitive emissions of hazardous vapors, volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) has been identified in operations at Army plants and depots. The High Mesa Technologies (HMT)/Coyote Aerospace team proposes to meet this need using proven silent discharge plasma (SDP) techniques, developed by the Electric Power Research Institute and Los Alamos Nat ...

    SBIR Phase I 1997 Department of DefenseArmy
  2. 30% Efficient Three Junction Solar Cells for Space Concentrator Modules

    SBC: Jx Crystals Inc.            Topic: N/A

    While 30% AM0 efficient GaAs/GaSb mechanically stacked concentrator solar cells have been previously fabricated, these cells were designed for 100 suns concentration using point focus optics. These cells also used prismatic cover slides to reduce grid shading losses, a feature which is not practical when thick cover slides are used for radiation protection. When operated at 25 suns with line focus ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Advanced Metal Powder Manufacture for MLCC Applications

    SBC: NANOCHEM RESEARCH, INC.            Topic: N/A

    Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Integrated MEMS Device

    SBC: PATTON TECHNOLOGY CO.            Topic: N/A

    A need exists to develop a fully integrated monolithic microsystem to perform chemical and bloassays in a reliable, accurate and repeatable, even continuous way. Durability of the device is of paramount importance. We propose in Phase I to develop a MEMS microfluidic device that can be fully integrated with a variety of microsensors in Phase II. We will exploit the elegance of a simple, easy to ...

    SBIR Phase I 1997 Department of DefenseArmy
  6. Advanced Armor Vehicle Design

    SBC: Physics Mathematics &            Topic: N/A

    This project applies a combination of Artificial Neural Networks (ANN), Genetic Algorithms (GA), and CAD software to the problem of optimum armor design. Previous work for TACOM has established the efficacy of ANN/GA as applied to the problem of 1-D armor design. This new work will extend the concept to full 3-D vehicle geometries (CAD models). The CAD part of the code will handle the 3D data d ...

    SBIR Phase I 1997 Department of DefenseArmy
  7. Development and Validation of an Exogenous Metabolic Activation System for FETAX

    SBC: STOVER & ASSOC., INC.            Topic: N/A

    Frog Embryo Teratogenesis Assay: Xenopus (FETAX) is a 96-h, whole-embryo bioassay designed to detect potential developmental toxicants. The primary goal of this research is to improve the predictability and increase the overall utility of FETAX as a screen for developmental toxicants that pose a hazard to human health. Since Xenopus laevis embryos lack mixed-fliriction oxidase metabolism (cytoch ...

    SBIR Phase I 1997 Department of DefenseArmy
  8. Low Temperature Processing of Boron Carbide Cement Composite for Tough, Wear Resistant Structures

    SBC: TPL, INC            Topic: N/A

    Natural materials such as tooth, bone or shell consist of a high volume fraction of ceramic grains coated by thin layers of proteinaceous film. The ceramic grains are grown in situ in a pre-formed organic polymer matrix. The organic portion provides high toughness, while the ceramic component provides stiffness. This unique microstructure allows for mechanical properties superior to man-made ce ...

    SBIR Phase I 1997 Department of DefenseArmy
  9. Development of Safe, Effective Difluoramination Reagents

    SBC: TPL, INC            Topic: N/A

    Rocket motors that develop greater thrust with lower weight and volume require-ments are an ever present goal of the BMDO. One method of providing this is through formulation of higher energy propellant mixtures. TPL proposes to develop a new method of effectively producing new high perfor-mance propellant constituents for launch, orbit-orbit transfer and station keeping propulsion systems. The p ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Solid-State Spray Forming of Near-Net-Shape Structural Materials

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: N/A

    The objective of this research is to demonstrate the feasibility of spray forming aluminum Metal Matrix Composites (MMC) in the solid-state physical form as a light weight structural material. It is anticipated that this innovative manufacturing process will provide opportunities to fabricate near-net-shape spacecraft and interceptor structures with unique material properties. The process called S ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government