Award Data

Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

CURRENT FRAME BUFFER TECHNOLOGY IS NOT OPTIMIZED FOR USE WITH GENERAL PURPOSE PROCESSORS. THIS PROPOSAL IS FOR A PROGRAM TO DEVELOP A BREADBOARD FRAME BUFFER WHICH IS EFFICIENTLY ACCESSED BY SUCH PROCESSORS. THE FRAME BUFFER IS BASED ON THE VME BUS AND IS SCALABLE TO LARGE AMOUNTS OF IMAGE MEMORY AND VERY FAST IMAGE ACQUISITION RATES. ALL IMAGE DATA IS RANDOMLY ACCESSIBLE AT HIGH SPEED. ANTICIPATE ...

A high repetition rate mid infrared laser (3-5 microns) capable of providing multispectral output covering all bands used by infrared missile would make a solid state laser based IRCM system a potentially attractive replacement for black body infrared jammers. We propose a novel laser concept that can provide the desired spectral output at repetition rates exceeding the current state-of-the-art. W ...

Significant deficiencies exist in the laser source technology for IRCM, specifically in the limited pulse rep-rate capability, limited average power output and capability to be transitioned to field environments. We propose a diode pumped solid state Er,Ho:YSGG laser and optical parametric oscillator to resolve these deficiencies. This laser has a potential dual use market in micro-surgery where t ...

Presently there are no broadly tenable, narrow linewidth souces that operate throughout the mid-infrared (mid-IR) region of the spectrum, from 1 to 5 microns. Traditional sources have very low spectral brightness (low power per unit spectral bandwidth). This proposal describes a novel approach to produce a source with very high spectral brightness, tunable over the range of 1.1 to 4.3 microns. ...

The high cost of near-to-mid infrared laser sources is problematic for many military applications, such as seekers where sources are short lived. Order-of-magnitude cost reductions are needed for 10-20 watt, 1-micron lasers. The proposed approach to reducing costs involves using novel manufacturing processes to greatly reduce parts count and assembly time, thus reducing cost. When applied to a ...

With new detectors capable of sensing 7.5 - 9 micron wavelengths, a future threat is emerging since these detectors can be used in seekers. The need is to counter this threat with a laser source operating at 7.5 - 9 microns. The source requirements are 5 - 10 Watts of average power and a repetition rate of > 10 kHz. The proposed laser source is a Nd:YAG-pumped tandem OPO system consisting o ...

The Air Force Phillips Laboratory is seeking approaches for demonstrating frequency agile COIL (chemical oxygen iodine lasers) operating near 1.31 microns and at 10 kHz rep rates. Frequency conversion approaches must be capable of handling high average power levels, greater than 10 kWatts. Converting a COIL device to high peak powers will be necessary for frequency conversion. The approach prop ...

For future long-range theater ballistic missile defense, aircraft-mounted LADAR systems require eyesafe laser transmitters that produce higher pulse energy and better beam quality than currently available optical parametric oscillators (OPOs) pumped by diode-pumped Nd:YAG lasers. Aculight proposes a novel laser transmitter approach that can simultaneously generate the required pulse energy, b ...