You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  2. Collaborative Systems Engineering Workbench and Network

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    The Virtual Engineering firm is a reality, with a team of scientists and engineers scattered at home sites working together to solve tough engineering problems. This SBIR will perform research and development to provide collaborative system engineering tools for network engineering projects. We will explore new directions for collaborative systems engineering (SE) that enable distributed req ...

    SBIR Phase I 1997 Department of DefenseNavy
  3. Development of a Dynamic Gas Condensation Technique for Commercial Production of Nanometer Metal Powders

    SBC: New Mexico Nano-energetics            Topic: N/A

    Scientific innovations are commercially worthless until they are matched by corresponding manufacturing innovations. This dilemma characterizes the current status of nanometer metal powder technology. On one hand, years of scientific research have unambiguously demonstrated the utility of nanoscale metal materials for a myriad of high technology applications; on the other hand, current manu ...

    SBIR Phase I 1997 Department of DefenseNavy
  4. An Investigation of a Faster High Intensity Radiated Fields (HIRF) Aircraft Testing Techniques

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    A feasibility investigation is proposed for designing a HIRF aircraft test facility which reduces existing test time by at least a factor of two without comprising the HIRF requirements for aspect angle/polarization and field strengths (both average and peak). SEA proposes a hybrid TEM cell/reverberation facility which will reduce test time involved with repositioning test equipment or test ...

    SBIR Phase I 1997 Department of DefenseNavy
  5. Multi-window spectral estimation with optical processing for ISAR imaging

    SBC: Signition, Inc.            Topic: N/A

    We propose a new method for adaptive nonstationary spectral estimation and harmonic analysis for stepped-frequency inverse synthetic aperture radar (ISAR) imaging. The essential idea is to construct a set of orthogonal windows that have little spectral leakage and use each of these windows to create an independent spectral estimate. A data dependent and frequency dependent weighted average ...

    SBIR Phase I 1997 Department of DefenseNavy
  6. Polymer Infiltration/Pyrolysis Processing of TMD Missile Propulsion Components

    SBC: TPL, Inc            Topic: N/A

    The proposed research is directed toward demonstrating the feasibility of manufacturing refractory matrix continuous fiber-reinforced ceramic composites (RM-CFCCs) by Polymer Infiltration/Pyrolysis (PIP) processing. RM-CFCCs are currently produced only by Chemical Vapor Infiltration (CVI) which is very costly and time consuming. PIP processing is a simple extension of the methods used to manufactu ...

    SBIR Phase I 1997 Department of DefenseNavy
  7. Four Dimensional (4-D) Atmospheric and Oceanographic Instrumentation

    SBC: ZIVKO AERONAUTICS, INC.            Topic: N/A


    SBIR Phase I 1997 Department of DefenseNavy
  8. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  9. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  10. Methodology to Predict Ballistic Penetration and Damage of Composite Laminated Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Current utilization of composite materials in air and surface weapons systems and structures is extensive, and the use of these materials can be expected to increase in the future. Weapons effectiveness assessments and the design of protective structures require methodologies to predict the terminal ballistic interactions between projectiles and fragments penetrating composite laminated target st ...

    SBIR Phase I 1996 Department of DefenseNavy
US Flag An Official Website of the United States Government