You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ultra Narrowband Optical Parametric Oscillator

    SBC: Aculight Corporation            Topic: N/A

    Presently there are no broadly tenable, narrow linewidth souces that operate throughout the mid-infrared (mid-IR) region of the spectrum, from 1 to 5 microns. Traditional sources have very low spectral brightness (low power per unit spectral bandwidth). This proposal describes a novel approach to produce a source with very high spectral brightness, tunable over the range of 1.1 to 4.3 microns. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Robust Multifunction Laser

    SBC: Aculight Corporation            Topic: N/A

    The high cost of near-to-mid infrared laser sources is problematic for many military applications, such as seekers where sources are short lived. Order-of-magnitude cost reductions are needed for 10-20 watt, 1-micron lasers. The proposed approach to reducing costs involves using novel manufacturing processes to greatly reduce parts count and assembly time, thus reducing cost. When applied to a ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. Solid State Seed Laser for COIL

    SBC: Aculight Corporation            Topic: N/A

    The Air Force Phillips Laboratory is seeking approaches for demonstrating frequency agile COIL (chemical oxygen iodine lasers) operating near 1.31 microns and at 10 kHz rep rates. Frequency conversion approaches must be capable of handling high average power levels, greater than 10 kWatts. Converting a COIL device to high peak powers will be necessary for frequency conversion. The approach prop ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Armament Research

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Recent efforts in the target vulnerability community (fixed ground targets, mobile ground targets, and aircraft) have focused on enhancing the blast and fragmentation modeling from weapon detonations. This includes modeling propagation of the detonation effects from the weapon through their interaction with the target geometry, to the development of loads on and response of the target structure. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Slipper Wear/Gouging Phenomena

    SBC: Applied Research Associates, Inc.            Topic: N/A

    The objective of this work is to develop analytical techniques to characterize wear and gouging phenomena of slippers at speeds up to hypersonic and demonstrate means to evaluate or reduce slipper wear/gouging. Specifically, we will develop analytical techniques that can be used to predict slipper wear patterns and gouging phenomena throughout the sled velocity regime to Mach 10. This will inclu ...

    SBIR Phase I 1997 Department of DefenseAir Force
  6. PAINT STRIPPING METHODS

    SBC: Autocrawler Llc            Topic: N/A

    AutoCrawler LLC has been developing a new environmentally compliant coatings removal technology , called AuotCrawler to the airframe manufacturing and maintenance industries. AuotCrawler to the airframe manufacturing and maintenance industries. AutoCrawler LLC is working with firms developing new technologies, including plastic bead media, and Wheat starch coatings removal technologies includin ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. Ultra-Wideband Waveguide Bends Using Continuously Varying Dielectric (CVD) Materials

    SBC: FARR RESEARCH, INC.            Topic: N/A

    Bends in waveguides are a problem for high-voltage Ultra-Wideband (UWB) systems. The difficulty arises because only a straight section of standard transmission line can support a pure TEM mode. And a pure TEM mode is necessary to preserve the risetime of the transmitted impulse. When there is a bend in the waveguide, the transmitted signal is a broader impulse than the incident signal. This ca ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Multifunction Impulse Radiating Antenna

    SBC: FARR RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Development of Wide Field ofView Display Technology for C4I Applications

    SBC: Microvision, Inc.            Topic: N/A

    The Air Force's capability to manage decentralized forces through centralized command and control organizations is highly dependent on the ability of the theater commanders to rapidly sort, analyze, and process a tremendous amount of real-time data. The presentation of visual data to the commanders has become a primary target for information overload.Microvision proposes to build on their Virtual ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Multi-dimensional, User-oriented Synthetic Environment (MuUSE): A Standard Interface Toolset System for Improving Air Force C4I Tasks

    SBC: MUSE TECHNOLOGIES, INC.            Topic: N/A

    We propose a standard software system that enables a natural, intuitive interface between computer operators and their data, for improving and increasing the capability of Air Force C4I systems. Specifically, the tasks addressed here are: (1) multi-dimensional map displays for interactive planning tools; (2) new tools for modernization of base-level business processes; and (3) improved human int ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government