You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Cycle Fatigue Testing of Turbine Blades Under Biaxial Loading

    SBC: ADTECH SYSTEMS RESEARCH INC            Topic: N/A

    Although technologies derived under the Integrated High Performance Turbine Engine Technology (IHPTET) initiative should result in higher performance of gas turbine engines, the durability of engine components continues to be one of the most important design issues which impacts their affordability and robustness. It is currently very difficult to measure or predict the fatigue life of engine com ...

    SBIR Phase I 1997 Department of DefenseAir Force
  2. Ambient Light Control Using Guest Host Liquid Crystal-Dye Systems

    SBC: Alphamicron, Inc.            Topic: N/A

    Continuous attenuation of ambient light without image distortion is of great importance in helmet mounted displays. To accomplish this, we propose a device based on liquid crystal-dichroic dye mixture. The system is electrically controllable, light weight, with full grey scale capability for all light conditions. It addresses all of the requirements and restrictions of visor based helmet mounte ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. Armament Research

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Recent efforts in the target vulnerability community (fixed ground targets, mobile ground targets, and aircraft) have focused on enhancing the blast and fragmentation modeling from weapon detonations. This includes modeling propagation of the detonation effects from the weapon through their interaction with the target geometry, to the development of loads on and response of the target structure. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Slipper Wear/Gouging Phenomena

    SBC: Applied Research Associates, Inc.            Topic: N/A

    The objective of this work is to develop analytical techniques to characterize wear and gouging phenomena of slippers at speeds up to hypersonic and demonstrate means to evaluate or reduce slipper wear/gouging. Specifically, we will develop analytical techniques that can be used to predict slipper wear patterns and gouging phenomena throughout the sled velocity regime to Mach 10. This will inclu ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Ion Beam Treatment for Metal Matrix Composites

    SBC: Applied Sciences Inc.            Topic: N/A

    New materials such as continuous fiber reinforced aluminum matrix composites exceptional performance, but often at the expense of incompatibility with conventional joining techniques. Spacecraft structures require high stiffness for stable structures and launch vibration resistance, as well as low outgassing characteristics, especially when cryogenic sensors are in use on the spacecraft. Solutio ...

    SBIR Phase I 1997 Department of DefenseAir Force
  6. INTERACTIVE SIMULATION SYSTEM FOR DESIGN OF MULTI-STAGE MATERIAL PROCESSES

    SBC: AUSTRAL ENGINEERING & SOFTWARE, INC.            Topic: N/A

    Austral Engineering and Software, Inc. proposes to develop a computer platform for simulation-and-optimization-based design of multiple-stage manufacturing processes. Phase I will use metal forming processes to demonstrate feasibility of embedding analytical models of basic transport phenomena into design models that include geometric, microstructure, and processing features. Each stage of a me ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. Ultra-Wideband Waveguide Bends Using Continuously Varying Dielectric (CVD) Materials

    SBC: FARR RESEARCH, INC.            Topic: N/A

    Bends in waveguides are a problem for high-voltage Ultra-Wideband (UWB) systems. The difficulty arises because only a straight section of standard transmission line can support a pure TEM mode. And a pure TEM mode is necessary to preserve the risetime of the transmitted impulse. When there is a bend in the waveguide, the transmitted signal is a broader impulse than the incident signal. This ca ...

    SBIR Phase I 1997 Department of DefenseAir Force
  8. Multifunction Impulse Radiating Antenna

    SBC: FARR RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Cost Estimating Methodology for Advanced Air Vehicles

    SBC: Frontier Technology Inc.            Topic: N/A

    Historically, the Air Vehicle Technology industry has developed technologies based upon performance and, to a much lesser extent, the cost of individual technologies. The public and government will no longer justify and support these costs inlight of a perception that the enemy has been defeated. Emphasis of Science and Technology efforts must now be on system affordability. Further "gray beard ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Development of Filtered Rayleigh Scattering Velocimetry for Wind Tunnel Applications

    SBC: Innovative Scientific Solutions, Inc            Topic: N/A

    The proposed SBIR research targets the development of a Filtered-Rayleigh Scattering (FRS) velocimetry systrm for the study of unsteady aerodynamics. During Phase I a two-component FRS velocimetry system will be contructed. Enhaqncements will be made to the 1) hardware: improved iodine filter, frequency-stabilized laser, scientific-grade high-resolution cameras, packaged receiving optics, 2) so ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government