Award Data

Standard Digital CMOS silicon circuits will have high quality Thin Film emitters, and modulators integrated on to the silicon using epitaxial liftoff and results in low cost opto-electronics in the near future. ABJ Integration is a leader in the field and proposes to design an optimized FPA readout system using this technology. Both emitters and modulators as signal sources will be investigated.

ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

N/A

N/A

INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

This proposal is focused at testing a new family of intermetallic materials for superior wear resistance in automotive applications due to the self-lubricating potential of the base material at a significant reduction in operating cost and capital investment. The proposed materials are produced by a new technique resulting in uniquely superior properties. Due to the ultrafine microstructure resu ...

THE WASTE HEAT EXCHANGER IS OFTEN THE LARGEST SINGLE COMPONENT IN DIESEL-EXHAUST POWERED AIR CONDITIONING SYSTEMS, AND ON ACCOUNT OF ITS HIGH MATERIAL CONTENT, IS OFTEN THE HEAVIEST AND MOST COSTLY AS WELL. THE NEED EXISTS FOR A HEAT EXCHANGER DESIGN AND FABRICATION TECHNIQUE WHICH IS COMPACT AND LIGHTWEIGHT, RESISTS FOULING FROM EXHAUST GASES, IS EASILY CLEANED, USES INEXPENSIVE MATERIALS, AND IS ...

The XA2 gasoline burner is widely used by the military to meet a variety of food preparation and heating requirements in the field. Because of the trend toward an single-fuel Army vehicle fleet and away from gasoline as a general purpose fuel, a diesel/JPS fueled burner is sorely needed. A recently developed catalytic vapor generator together with the proposed metal-hydride preheater should prov ...

Future battlefields will require independent operations and increased operational tempo, placing severe burdens on weapons platform crewmembers in the areas of information flow management, data fusion, and assessment of data to arrive at the most tactically acceptable decisions. Work continues in the development of decision aids to assist direct/indirect fire weapon platform commanders in accompl ...

WE PROPOSE TO DEVELOP A PATTERNED ETCHING TECHNIQUE FOR INFRARED DETECTOR ARRAYS BASED ON PHOTO-INDUCED ETCHING OF HGCDTE THAT IS COMPATIBLE WITH THE ULTRA-HIGH VACUUM ENVIRONMENT OF A MOLECULAR BEAM EPITAXY APPARATUSES. THE PHASE I RESEARCH FOCUSES ON ESTABLISHING THE EFFICACY OF SUITABLE GAS PHASE PRECURSORS FOR THE ETCHING PROCESS. IF THE PHASE I RESEARCH IS SUCCESSFUL, OPTICAL PROJECTION TECHN ...