You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Solid State Neutron Sensor

    SBC: Applied Sciences Inc.            Topic: N/A

    Unexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. A Novel Technique for Processing Advance Composites and Joining/Bonding Epoxy

    SBC: Applied Sciences Inc.            Topic: N/A

    The development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. InGaP/InGaAs-on-Ge Concentrator Solar Cells for Space Power Generation

    SBC: Essential Research, Inc.            Topic: N/A

    Essential Research, Inc. proposed to develop an ultra-high efficiency, dislocation-free, monolithic two-terminal, two-junction InGaP/InGaAs on Ge solar cells for space applications. The energy bandgap (Eg) values for the top and bottom cells will be 1.7 eV and 1.1 eV, respectively. These bandgaps are theoretically optimal for a two-junction tandem cell configuration. This solar cell will have a pr ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Ionic Self Assembled Monolayer (ISAM) Processes for Electronic Materials and Devices

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    Novel ionic self-assembled monolayer (ISAM) processes for the fabrication of advanced electronic materials and devices will be developed through this program. Revolutionary ISAM methods to create nanostructured multi-layer inorganic/organic thin-films offer major advantages over conventional manufacturing processes, since the process is simple, low-cost and environmentally friendly in that no vola ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Protective Coatings for Optical System Components Fabricated Using Ionic Self Assembled Monolayer (ISAM) Processes

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    F&S and Virginia Tech will cooperatively develop high performance protective ionic self-assembled monolayer (ISAM) organic/inorganic coatings for space-based optical and structural components, and work with Litton to upscale practical coating manufacturing. Revolutionary ISAM methods of creating multi-layer protective nanopartwcle films offer major advantages over con-ventional coating processes, ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Lethality Enhancement of Hit-to-Kill Interceptors

    SBC: GENERAL SCIENCES INC            Topic: N/A

    Although the "hit-to-kill" technology has shown promise in recent field tests, complete destruction/neutralization of biological submunitions cannot be guaranteed. The subject effort proposes a new concept which enhances the lethality of hit-to-kill interceptors by a synergistic combination of (a) enhanced energy due to a non-parasitic chemical component provided by reactive structural components ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Lightweight Cryogenic Power Supply for Mobile Military Applications

    SBC: HESTON CONSULTING CO., INC.            Topic: N/A

    BMD0 is interested in developing new electrical power system technologies that provide lighter, smaller, lower cost, more efficient and reliable power supplies for a variety of mobile or transportable systems, such as the proposed Ground Based Radar (GBR). Conventional power generation equipment technology will not be adquate to meet the size, weight and efficiency goals of these new systems. Cryo ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Novel Processing of Permanent Magnetic Materials via Dynamic Magnetic Compaction (DMC) Process to Obtain High Energy Density at High Temperature (300-

    SBC: IAP RESEARCH, INC.            Topic: N/A

    Current rare earth permanent magnets have proven to be in adequate for higher temperatures (300-500_C) military and Air Force applications. Development of permanent magnetic materials which can operate in high temperature regime will enable design of simpler, more efficient magnetic systems. The More Electric Aircraft (MEA) concept pursued by the US Air Force drives this need. We propose a novel p ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Thermally Insulated Flexible Composite Cores for Aerospace Applications

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Aerospace composite panels containing a core structure usually use an expanded honeycomb of either aluminum, NOMEX, or carbon fiber. These types of composite panels are often used as structure since the honey-comb core provides stiffness in the "Z" direction. However, they provide no thermal insulation value. Aerospace craft operating both inside and outside the earth's atmosphere experience envir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government