Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. A Solid-Solid Hybrid Gas Generator Fire Suppression System

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N/A

    Not Available This Phase 2 proposal addresses the advanced development and commercialization of a novel solid-solid hybrid gas generator fire suppression technology to replace the ozone depleting Halon 1301 for total flooding applications. Mainstream's solid-solid hybrid gas generator technology will result in the delivery of chemical extinguishing agents to the fire in addition to the inert gas a ...

    SBIR Phase II 1999 Department of Commerce
  2. High-Temperature Thermal Conductivity Measurements of Ceramic Powders

    SBC: MetSys Corporation            Topic: N/A

    Not Available It is proposed to develop an advanced field apparatus for measuring the thermal conductivity of ceramic powders over the range of temperatures from room temperature to 1500 to 2500 K, depending upon the particular material and its compatibility with other materials. The apparatus will have the capability to carry out fully automated thermal conductivity measurements, by transient or ...

    SBIR Phase II 1999 Department of Commerce
  3. N/A

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  4. N/A

    SBC: AZIMUTH, INC            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  5. N/A

    SBC: STEADFAST TECHNOLOGIES            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  6. Optical Fiber Devices for Composite Process Monitoring

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    Not Available The primary objective of the Phase 1 program was the development of optical fiber devices and cost-effective signal conditioning systems to produce commercially available composite process monitoring systems. The tasks successfully completed during the Phase 1 effort are as follows: (1) examined the performance requirements of the optical fiber devices and demodulation systems for FT ...

    SBIR Phase II 1999 Department of Commerce
  7. N/A

    SBC: Modus Operandi, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  8. A Low Cost Superconducting Frequency Counter Josephson Voltage Standard

    SBC: HYPRES, INC.            Topic: N/A

    The principal factor preventing wide use of the Josephson primary voltage standard is its cost. By reducing the cost of a HYPRES voltage standard to a level comparable with true cost of secondary standards (including the cost of calibration and low accuracy, etc.), and making it easy to use, we intend to put the Josephson voltage Standard within reach of most secondary standard users. In phase I ...

    SBIR Phase II 1997 Department of Commerce
  9. A Diode Laser Multigas Analyzer for Advanced Detection of Fires

    SBC: Southwest Sciences, Inc.            Topic: N/A

    Southwest Sciences will develop a novel fire detection technology based on optical spectroscopy, using diode lasers and fiber optics. Rapid, quantitative detection of part per million concentrations (or better) of multiple gases, including carbon monoxide, carbon dioxide, hydrogen cyanide, hydrogen chloride, and a fiber optical distribution network permits one laser to be used for at least 800 di ...

    SBIR Phase II 1997 Department of Commerce
  10. Automated Feature Extraction from Scanned Nautical Charts and High-Resolution Images for GIS Applications Using Expert Systems Programmable with Pseudo-English

    SBC: Susquehanna Resources And            Topic: N/A

    Converted from advanced automatic target recognition (ATR) processors, this new feature extraction/GIS system (a) uses raster data as input, and thus eliminates manual digitization; (b) uses expert systems to extract features automatically, and thus eliminates time-consuming and error-prone manual object tracing; and (c) vectorizes the extracted objects and converts them into GIS layers automatica ...

    SBIR Phase II 1997 Department of Commerce
US Flag An Official Website of the United States Government