You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Mechanical Characterization of Energetic Materials

    SBC: Dynamic Systems And Research Corporation            Topic: OSD09W02

    Through this research effort, DSR is developing test equipment that can be used by the Air Force to investigate inert and live explosive material properties through a variety of different pressure and temperature environments. Strain-rate levels are adjustable and will vary between 10-5-10-2 s-1 depending upon the stiffness and strength of the test material. 25.4-mm-diameter specimens with lengt ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  2. Second Language Sustainment Training with the Tactical Language and Culture Training System

    SBC: Alelo Tlt, LLC            Topic: OSD08CR2

    The purpose of this project is to develop new language training methods that help guard against language skill decay, and help recover from skill decay when it has occurred. It leverages previous DoD and ONR investments in language learning technology, but it focuses squarely on the language attrition problem. In addition to providing language training that is resistant to decay, it pays particula ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  3. Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: OSD09C03

    The objective of this proposed Phase II work is to develop a production method for manufacturing rolled plates of a high-strength aircraft aluminum alloy (7075) with high SCC (stress corrosion cracking) resistance. The corrosion resistance is to be improved without a loss in tensile strength. The basic operational processing procedure is to produce aluminum alloy plate through roll bonding of a co ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  4. N/A

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  5. N/A

    SBC: Altex Technologies Corporation            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  6. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  7. N/A

    SBC: AZIMUTH, INC            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  8. N/A

    SBC: DUBBS & SEVERINO, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  9. SMART SENSORS USING OPTICAL FIBER INTERCONNECTS AND DISTRIBUTED MEMS

    SBC: Luna Innovations Incorporated            Topic: N/A

    This SBIR program would develop practical methods for the interconnection, addressing and control of large numbers of distributed MEMS-based sensing and actuation elements using optical fiber multiplexing techniques. Such interconnected sensor/actuator arrays have immediate and long-term applications in the instrumentation and control of adaptive aircraft, spacecraft and hydrocraft structures, fl ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  10. Advanced Tooling Manufacturing for Composite Structures (ATMCS)

    SBC: Fem Engineering            Topic: N/A

    Sheet metal products have made an indispensable place for themselves in our day to day lives. Light weight, good surface finish, low finished product cost, and relatively good formability are just few of the many features that make the sheet metal products so attractive. This includes all the product lines such as automotive, aerospace, appliance, construction, instruments, heating and ventilati ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government