You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Mechanical Characterization of Energetic Materials

    SBC: Dynamic Systems And Research Corporation            Topic: OSD09W02

    Through this research effort, DSR is developing test equipment that can be used by the Air Force to investigate inert and live explosive material properties through a variety of different pressure and temperature environments. Strain-rate levels are adjustable and will vary between 10-5-10-2 s-1 depending upon the stiffness and strength of the test material. 25.4-mm-diameter specimens with lengt ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  2. Lithium-Ion (Li-ion) and Lithium-ion Polymer (Li-polymer) Battery Safety

    SBC: Physical Sciences Inc.            Topic: OSD09EP1

    Physical Sciences, Inc. (PSI) has demonstrated that electroactive polymer coatings (EAP) may be applied to the surface of the cathode materials for lithium-ion batteries to protect against catastrophic cell failure. These EAP coatings form an electrochemical"switch"that can prevent catastrophic failure in lithium-ion batteries by reversibly changing from a conductor to an insulator on overdischarg ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  3. Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: OSD09C03

    The objective of this proposed Phase II work is to develop a production method for manufacturing rolled plates of a high-strength aircraft aluminum alloy (7075) with high SCC (stress corrosion cracking) resistance. The corrosion resistance is to be improved without a loss in tensile strength. The basic operational processing procedure is to produce aluminum alloy plate through roll bonding of a co ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  4. N/A

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  5. Analysis and Improvement of Trivalent Chromium Conversion Coatings for Aluminum Alloys

    SBC: American Research Corporation of Virginia            Topic: N/A

    The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  6. N/A

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  7. N/A

    SBC: Aptima, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  8. N/A

    SBC: AZIMUTH, INC            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
  9. A Five Volt Lithium Battery

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    In this Phase I SBIR program we propose to develop a novel high voltage (5V) lithium-ion battery suitable for portable electronics equipmentand transportation applications. Lithium-ion batteries are already commercially available and typically consist of carbon anode, non-aqueous electrolyte and lithium transition metal oxide cathode such as LiCoO2, LiNiO2 or LiMnO4. These systems have an operat ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  10. N/A

    SBC: COVALENT ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government