You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Autonomous Navigation in GNSS-Denied Environments

    SBC: AURORA FLIGHT SCIENCES CORPORATION            Topic: T501

    Aurora proposes to transition UMD methods for insect-inspired, lightweight vision- and optical sensor-based navigation methods for a combined air-ground system that leverages the unique capabilities of airborne systems to achieve a progressively refined map of the exploration region which can be accessed by agents within the autonomous team for localization, and by scientists and other ground ob ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  2. Detectors with Improved Near-to-Mid IR Performance and Reduced Cooling Requirements

    SBC: AMETHYST RESEARCH INC            Topic: T802

    This program will develop an ultra-high performance infrared detector manufacturing technology with improved performance and cost effectiveness, and reduced cooling requirements when compared to the best commercially available HgCdTe and InGaAs detectors. This will be accomplished using a two-pronged approach addressing both device design and materials. First, the conventional pn photodiode device ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  3. Advanced Deposition Capability for Oxidation & Corrosion Protection Coatings

    SBC: Directed Vapor Technologies International, Inc.            Topic: T1201

    NASA's long range goals of reducing fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing the operation temperatures of gas turbine engines. The advent of advanced alloys, coatings, cooling technologies and ceramic components has created the potential for significant increases in the hot section of these engines; however, these advances wil ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  4. HybridSil Icephobic Nanocomposites for Next Generation Aircraft In-Flight Icing Measurement and Mitigation

    SBC: NANOSONIC INC.            Topic: A102

    The purpose of this SBIR program is to adapt NanoSonic's HybridSil® nanocomposites and combine high erosion resistance, low ice adhesion, and passive anti-icing functionality with Metal Rubber sensor technology to enable in-flight icing measurement and mitigation for next generation aircraft. During Phase I, NanoSonic successfully demonstrated novel sensor design concepts coupled with HybridSi ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  5. Compact, Lightweight Isolation Platform (CLIP)

    SBC: A-TECH CORPORATION            Topic: H901

    NASA has a critical need for improved bi-directional data transmission rates from a variety of spacecraft to Earth. NASA estimates that the current Mars to Earth transfer rate of 6 Mbps might be increased to 600Mbps using a Laser Communication (LC) system. Beam jitter caused by spacecraft-based motion must be reduced to sub-microradian levels to enable beaconless optical beam pointing. ATA will ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  6. 300C/15 kW power converter with AlGaN/GaN-Si MOS-HFETs for electric propulsion systems

    SBC: GENESIC SEMICONDUCTOR INC.            Topic: E101

    Capitalizing on a strong expertise in III-Nitride epitaxy, GaN-Si power device designs, and wide-bandgap power electronics, researchers at GeneSiC Semiconductor propose a SBIR program focused on the development of 15 kW/300C-rated power converters using AlGaN/GaN-Si MOS-HFETs and Schottky rectifiers. The proposed AlGaN/GaN-Si power converters to be developed in this program will usher in a new gen ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  7. Quick Spacecraft Thermal Analysis Tool

    SBC: LOADPATH, LLC            Topic: H304

    For spacecraft design and development teams concerned with cost and schedule, the Quick Spacecraft Thermal Analysis Tool (QuickSTAT) is an innovative software suite that will significantly reduce labor costs and effort associated with the design, analysis, and optimization of spacecraft. Unlike traditional analysis where highly-trained engineers spend days to months developing, running, and evalua ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  8. High Resolution Autostereoscopic Cockpit Display

    SBC: Dimension Technologies Inc.            Topic: A103

    During this Phase II program Dimension Technologies Inc. (DTI) proposes to design and build an autostereoscopic (glasses-free 3D) LCD based aircraft cockpit display that features switchable 2D & 3D operation, full LCD resolution in both 2D and 3D modes, a wide viewing area without head position restrictions, and high brightness. The display will be configured for installation and testing in a Boe ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  9. Specification Editing and Discovery Assistant

    SBC: GRAMMATECH INC            Topic: A106

    Accurate safety analysis of software suffers from a lack of appropriate tools for software developers. Current automated tools require approximate analyses; fully-assured verification with formal methods is expert-intensive. A key to improvement is machine-checkable specifications for software modules. Specifications are also needed to express the intent of software. Further, to scale to wide use, ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  10. Additive Friction Stir Deposition of Aluminum Alloys and Functionally Graded Structures

    SBC: AEROPROBE CORPORATION            Topic: H502

    State-of-the-art additive manufacturing technologies for metal parts have evolved primarily around powder metallurgy and fusion welding-based processes. These processing methodologies yield parts with inferior mechanical and physical properties as compared to wrought metal of the same composition. Additionally, the production rates for even the fastest processes are relatively low, the part enve ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government