You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    Microwave Technologies Incorporated is proposing the development of a very compact radio-frequency (rf) electron beam accelerator which appears to be well-suited for BMDO's directed energy applications. This novel concept employs a single short rf cavity operating in circular polarization to accelerate a low-energy ma ~netized pencil beam to energies that range from 2 to 10 MeV. The proposed accel ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  2. Ultra-high Dielectric Constant Dielectric Materials

    SBC: TPL, Inc            Topic: N/A

    NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  3. High Velocity Pulsed Plasma Thermal Spray

    SBC: UTRON, Inc.            Topic: N/A

    The quality and durability of coatings produced by virtually all thermal spray techniques could be improved by, among other things, increasing the velocity with which coatings particles impact the coated surface and by better control of the chemical and thermal environment seen by the particles during flight. A new and innovative approach to thermal spraying is proposed that can increase coating p ...

    SBIR Phase II 1996 Department of DefenseMissile Defense Agency
  4. Inorganic Confromal Coatings for SIC Packaging

    SBC: TPL, Inc            Topic: N/A

    Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  5. Comprehensible Descriptions for Fast Processing of Image Data

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    The proposed effort will apply advanced methods of hybrid learning to problems of detection and identification of sensory events (e.g., boost phase evens). Our approach aims at building a vision system capable of hybrid learning, in which symbolic (rule-based) and subsymbolic (neural network) strategies are integrated to achieve high efficiency and accuracy both in learning human comprehensible se ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  6. A Detection System for Determining the Concentration, Size, and Depth of Buried Radioactive Material

    SBC: Shonka Research Associates            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  7. Development of a Compact Electron Beam Accelerator

    SBC: MICROWAVE TECHNOLGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Embedded Sensors via Laser Engineered Net Shaping

    SBC: OPTOMEC, INC.            Topic: N/A

    Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Ultrahigh Quality, Single-Crystal Bulk Silicon Carbide

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    Silicon carbide materials will revolutionize semiconductor devices for military and commercial markets. The material's wide bandgap, high electric field breakdown, high thermal conductivity give SiC capabilities that far exceed those of silicon or gallium arsenide. Despite significant progress in silicon carbide development, fundamental defects--most prominently micropipes--persist. If SiC is to s ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Optimal SiC Source Powder for Bulk SiC Growth

    SBC: INTRINSIC SEMICONDUCTOR CORP.            Topic: N/A

    The properties of single-crystal silicon carbide are such that electronics devices from this material have demonstrated remarkable performance characteristics. Despite the material's promise, the material has not yet found acceptance in mainstream device markets because of the material's high cost, among other reasons. This Phase I SBIR proposes an SiC source powder with unique properties which wi ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government