You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Ion-Implanted 2-D MESFET Technology for Wireless Communications
SBC: Advanced Device Technologies, Topic: N/AThis Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
PROCESSED VAPOR GROWN GRAPHITE FIBERS FOR ELECTROMAGNETIC RAILGUNS
SBC: Applied Sciences Inc. Topic: N/AREQUIREMENTS FOR RAILGUN ARMATURES DICTATE MATERIALS PROPERTIES VALUESWHICH ARE DIFFICULT TO OBTAIN FROM CONVENTIONAL MATERIALS. THE NEED EXISTS FOR A MATERIAL WHICH HAS LOW DENSITY, HIGH MELTING POINT, HIGH THERMAL CONDUCTIVITY, LOW COEFFICIENT OF THERMAL EXPANSION, HIGH ELECTRICAL CONDUCTIVITY, HIGH VALUES FOR STRENGTH, AND GOOD CHARACTERISTICS OF LUBRICITY. GRAPHITE FIBER GROWN FROM PYROLYSIS O ...
SBIR Phase II 1989 Department of DefenseMissile Defense Agency -
CHEMICAL VAPOR DEPOSITION/HYBRID FIBERS FOR STRUCTURAL THERMAL AND ELECTRICAL APPLICATIONS
SBC: Applied Sciences Inc. Topic: N/AA NEED EXISTS FOR COMPOSITE REINFORCEMENTS WHICH HAVE ENHANCED AND COMPRESSIVE STRENGTH, WHILE RETAINING GOOD TENSILE STRENGTH AND MODULUS. THIS EFFORT EXPLORES A METHOD OF FIBER COATING WHICH ALLOWS VARYING OF THE REINFORCING FIBER DIAMETER. THE RESULT IS EXPECTED TO PRODUCE A COMPOSITE WITH THE DESIRED CHARACTERISTICS OF INCREASED COMPRESSIVE STRENGTH, WHILE PROVIDING A HIGHLY OXIDATION RESISTAN ...
SBIR Phase II 1990 Department of DefenseMissile Defense Agency -
Solid State Neutron Detector
SBC: Applied Sciences Inc. Topic: N/APhase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...
SBIR Phase I 1996 Department of DefenseMissile Defense Agency -
Solid State Neutron Sensor
SBC: Applied Sciences Inc. Topic: N/AUnexpected coupling between nuclear reaction cross sections and the solid state of metal deuterides has been demonstrated in layered Pd-PdO deuterided structures. As a result, high rates of charged particle and neutron measurements have been observed through a reaction initiated by altering the chemical state of the system. Moreover, the system acts as an amplifier of fast neutrons, with a 200-to- ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
A Novel Technique for Processing Advance Composites and Joining/Bonding Epoxy
SBC: Applied Sciences Inc. Topic: N/AThe development of a microwave curing method for resin matrix composites and jointing/bonding epoxy is proposed. This technique will take advantage of the ability of vapor-grown carbon fiber (VGCF) to absorb microwave energy with high efficiency. By adding VGCF to resin matrix composite material and epoxy, we hope that the materials can be processed by microwave irradiation in a manner that result ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
CHEMICAL VAPOR DEPOSITION/HYBRID FIBERS FOR STRUCTURAL THERMAL AND ELECTRICAL APPLICATIONS
SBC: Applied Sciences Inc. Topic: N/AN/A
SBIR Phase I 1989 Department of DefenseMissile Defense Agency -
OPTIMAL ENERGY MANAGEMENT FOR KINETIC ENERGY WEAPONS
SBC: BARRON ASSOCIATES, INC. Topic: N/AN/A
SBIR Phase I 1990 Department of DefenseMissile Defense Agency -
Nitride, Carbide and Non-Oxide In Situ Coatings Using RECVD,A New CVD Method
SBC: CCVD, Inc dba MicroCoating Technologies (MCT) Topic: N/ACurrently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner i ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency -
Production Friendly GaN Coatings Using RECVD, a New CVD Method
SBC: CCVD, Inc dba MicroCoating Technologies (MCT) Topic: N/ACurrently vacuum based methods of PVD and CVD are the only processes for forming GaN thin films and coatings. These methods are usually expensive and are not applied in a production friendly manner. An atmospheric deposition technique that inexpensively and easily applies GaN thin or thick films in an environmentally friendly manner is a priority for any number of DOD and commercial applications. ...
SBIR Phase I 1997 Department of DefenseMissile Defense Agency