You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  2. EFFECT OF AGING ON RESPONSE TIME OF NUCLEAR PLANT PRESSURE SENSORS

    SBC: ANALYSIS AND MEASUREMENT SERVICES CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1988 Nuclear Regulatory Commission
  3. DEVELOPMENT OF COATINGS FOR FIBERS INCORPORATED IN HIGH TEMPERATURE COMPOSITE MATERIALS

    SBC: ANALYSIS DESIGN & DIAGNOSTICS INC            Topic: N/A

    DARPA HAS IDENTIFIED A NEED FOR NEW AND IMPROVED TECHNIQUES FOR COATING CERAMIC FIBERS FOR SUBSEQUENT INCORPORATION INTO METALLIC, CERAMIC OR HYBRID MATRICES. AMERICAN MATRIX, INC.'S PHASE I PROGRAM ADDRESSES THE SIGNIFICANT PERFORMANCE ATTRIBUTES (DEFINED BY DARPA AS INTERFACE CHEMICAL REACTION INHIBITION, INTERFACE BOND DEVELOPMENT,AND TAILORED PROPERTIES) WITH A MULTI-FACETED COATING PROGRAM. S ...

    SBIR Phase I 1988 Department of DefenseDefense Advanced Research Projects Agency
  4. EXPERIMENTAL EVALUATION OF THE INFLUENCE OF GEOLOGY ON EXPLOSIVE SOURCE YIELD DETERMINATION

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  5. EXPERIMENTAL EVALUATION OF THE INFLUENCE OF SITE LAYERING AND BURST DEPTH ON RADIATED SEISMIC ENERGY

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  6. A New Instrument for Quantitive Measurements of High-Ionization Thereshold Elements in Nanostructures

    SBC: ATOM SCIENCES, INC.            Topic: N/A

    The objective of the project is to develop a new mass spectrometric diagnostic tool that will allow quantitative measurement on a nanometer scale of elements having a high ionization potential, such as hydrogen, carbon, nitrogen, oxygen fluorine, and phosphorous. The proposed work would extend the proven capabilities of laser resonance postionization of sputtered material to enable efficient meas ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  7. QUANTITATIVE AND SENSITIVE PROFILING OF DOPANTS AND IMPURITIES IN COMPOUND SEMICONDUCTORS USING...

    SBC: ATOM SCIENCES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  8. RESEARCH ON A THREE DIMENSIONAL NON-VOLATILE MASS STORAGE MEDIUM

    SBC: Delphi Research Inc            Topic: N/A

    A PROJECT IS PROPOSED TO INVESTIGATE THE FEASIBILITY OF COMBINING A PHASE-CHANGE NON-LINEAR OPTICAL MATERIAL WITH A PHOTOREFRACTIVE MATERIAL IN THIN LAYERS TO ACHIEVE A THREE DIMENSIONAL MASS STORAGE MEDIUM. ORGANIC COMPOUNDS POSSESSING GOOD POLARIZABILITY ALONG WITH COMPOSITION CONDUCIVE TO PHASE CHANGE MECHANICS WILL BE TESTED FOR SHG AND PHASE CHANGE ABILITY, THEN PREPARED IN THIN FILMS ON PHOT ...

    SBIR Phase I 1988 Department of DefenseDefense Advanced Research Projects Agency
  9. Design of Superelastic Nitinol Enhanced Puncture Resistant Armor

    SBC: Garman Systems Inc.            Topic: N/A

    Proposed is an investigation into the use of flexible, extremely strong and tough, superelastic Nitinol shape memory alloy as a means of dramatically improving puncture resistance for personnel body armor. The Nitinol material is proposed as a surface material or coating for reinforcement or organic fiber fabrics and/or composites or aramid and UHMW polyethylene used in the current body armor sys ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Nanoscale X-Y Stage for Precision Lithography

    SBC: Garman Systems Inc.            Topic: N/A

    The state-of-the-art in the microelectronics industry is being pushed primarily by two motivations: the demand for more circuitry etched per unit area and the demand for higher throughput. Both of these needs can be met by an increase in the speed and/or the resolution of lithography positioning equipment. Proposed herein is an innovative X-Y stage design through which control of positions on th ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government