You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Optoelectronic Packaging for Through-Substrate Communications

    SBC: Abj Integration Technologies,            Topic: N/A

    ABJ Integration Technologies, Inc. proposes to model a vertically optically interconnected stack of silicon integrated circuits to form a three dimensional system. This 3D system will utilize through-substrate optoelectronic communication to which the package and silicon are optically transparent. System optimization for user specifications will include materials and components such as emitters ...

    SBIR Phase I 1997 Department of DefenseArmy
  2. SCALABLE DIRECT ACCESS FRAME BUFFER

    SBC: Access Dynamics, Inc.            Topic: N/A

    CURRENT FRAME BUFFER TECHNOLOGY IS NOT OPTIMIZED FOR USE WITH GENERAL PURPOSE PROCESSORS. THIS PROPOSAL IS FOR A PROGRAM TO DEVELOP A BREADBOARD FRAME BUFFER WHICH IS EFFICIENTLY ACCESSED BY SUCH PROCESSORS. THE FRAME BUFFER IS BASED ON THE VME BUS AND IS SCALABLE TO LARGE AMOUNTS OF IMAGE MEMORY AND VERY FAST IMAGE ACQUISITION RATES. ALL IMAGE DATA IS RANDOMLY ACCESSIBLE AT HIGH SPEED. ANTICIPATE ...

    SBIR Phase I 1992 Department of DefenseDefense Advanced Research Projects Agency
  3. COST REDUCTION DESIGNS OF A LARGE RANGE OF HIGH PERFORMANCE PM ALTERNATORS AND CONTROLS WITH A PARALLEL EMPHASIS ON...

    SBC: Active Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of DefenseDefense Advanced Research Projects Agency
  4. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  5. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. THERMOPLASTIC ELASTOMER (TPE) CHEMICAL PROTECTIVE (CP) GLOVES BY INJECTION MOLDING PROCESS

    SBC: Eskay Assoc.            Topic: N/A

    THERMOPLASTIC ELASTOMER (TPE) BY INJECTION MODLING OFFERS AN ALTERNATE METHOD FOR FORMING CHEMICAL PROTECTIVE GLOVES A SOCMPARED TO THE CONVENTONAL DIP PROCESS USING BUYTL RUBBER SOLUTIONS. THE ADVENT OF VARIOUS TPES WITH OLEFINIC, STYRENIC, URETHANE, ENGINEERING RESINS AND ALLOYS AND BLENDS OFFER THE ADVANTAGE OF INJECTION MODLING PRODUCTS WHICH HAVE BEEN CONVENTIONALLY MADE BY ELASTOMER COMPOUND ...

    SBIR Phase I 1992 Department of DefenseArmy
  8. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  9. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  10. COMBAT VEHICLE TACTICAL DISPLAY SYSTEMS (TDS)

    SBC: Advanced Programming Concepts            Topic: N/A

    ADVANCED PROGRAMMING CONCEPTS (APC) PROPOSES TO EXPAND A PREVIOUSLY DEVELOPED TACTICAL DISPLAY SYSTEM (TDS) TO ORIENT IT FOR USE BY TANK AND OTHER ARMORED VHEICLE COMMANDERS. THIS TDS WILL (FOR PHASE I) BE UPDATED VIA SMALL VHF PORTABLE RADIOS USING X.25 PROTOCOL. THE TACTICAL DISPLAY WILL CONSIST OF TERRAIN, OWN UNIT POSITION, FRIENDLY AND ENEMY UNIT POSITIONS AND MAP OVERLAYS FOR REFERENCE. FREE ...

    SBIR Phase I 1990 Department of DefenseArmy
US Flag An Official Website of the United States Government