You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Data Mining Techniques for Plan Sentinel Development

    SBC: DEUMBRA, INC.            Topic: N/A

    We propose a plan sentinel prototype consisting of three components. The first component is the development of a plan mining tool which identifies and computes false or missing assumptions and deviations to plans and time phased tasks. The second component, the annotated database, computes plans which the plan mining tool access and parses into a logical annotated rule set. Finally, MAVIS, a to ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  2. Nanoelectric Modeling Software Development

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to develop an engineering model of Resonant Tunneling Devices (RTD) to be implemented in AIM-Spice, a commercial software package running under Windows 95/NT. The development of a reliable device model is a prerequisite for the design and production of any semiconductor device technology. The RTD model will be a semi-empiri ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  3. Composite Retrofit Technicques for Blast Resistance

    SBC: APTEK, Inc.            Topic: N/A

    This Small Business Innovation Research Project will determine the advantages and disad-vantages of fibrous/polymeric composite materials over traditional material (steel) for retrofitting key civilian facilities against terrorist bomb attack. Retrofit techniques we will evaluate are: strengthening fully and partially exposed columns with composite wraps or shells, masonry walls with bonded comp ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  4. Automated Intrusion Detection for GCCS Les

    SBC: Arca Systems, Inc.            Topic: N/A

    Arca Systems proposes to initiate the design and development of an intrusion detection system for the GCCS LES (and similar environments). Many current intrusion detection tools are Unix-based, focused on a single host or on a generally homogeneous distributed environment. The notional GCCS LES environment makes extensive use of distributed architecture, using support from the COTS technologies ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  5. Continuous Apertures

    SBC: ASTRON WIRELESS TECHNOLIGIES, INC.            Topic: N/A

    The program objective is to develop novel designs, techniques, and structures to synthesize apertures capable of efficient operation over broad frequency ranges and functions. Conventional apertures are narrowly focused, application specific, and basically single point design. To decrease the cost of antennas, a more universal building block design is required. It would provide a significantly ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  6. Programmable Optical Beam Former with 10 Nanosecond Reconfiguration Rates

    SBC: Bosonics, Inc.            Topic: N/A

    This project develops low-cost optical beamscanners using fast binary amplitude modulators. The modulators are solder-bumped to silicon drive circuits which have a programmable architecture for rapid, flexible array addressing. The multiple quantum well (MQW) based modulators operate at 850-860 nm with a random access speed over 100 MHz---faster than any known scanner. Preliminary simulation an ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  7. Low Loss and Cost Thin Film for Frequency Adaptive Electronics

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Microwave resonators of linear dielectrics for wireless applications have been fabricated in bulk form using conventional ceramic processing in the current commercial market. Machining and fine polishing are frequently required for dimension control and surface finish in addition to the inherent unfeasibility to fabricate miniaturized electronic circuits. It is vital to develop a suitable thin f ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  8. Digital Wideband Electromagnetic Sensor

    SBC: CENTER FOR REMOTE SENSING, INC.            Topic: N/A

    Improved magnetic and electromagnetic sensors covering a wide range of frequencies, 0 to 10kHz, and with extremely high sensitivity are proposed for broad area detection and characterization of underground targets. The sensors can be used for a variety of applications and for different e.m. sources. They can be configured as gradiometers, as vector or scaler sensors and can be used as internette ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  9. Hyperspectral and Synthetic Aperture Radar (SAR) Fusion for Concealed Target Detection

    SBC: Data Fusion Corporation            Topic: N/A

    DFC, along with TSC and AIG, propose a Phase I effort to study the feasibility of subspace based signal processing algorithms for exploiting multi-spectral, multi-sensor data to detect targets concealed by foliage and/or man-made obstruction. Registration of dissimilar images is accomplished using geometric invariance.

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
  10. Thermomechanical Characterization System for Mixed Technology Electronic Assemblies

    SBC: Electronic Packaging            Topic: N/A

    One approach to wider use of mixed mode technology requires polymer-based packaging materials, which place greater demands on the thermomechanical performance of the package design. Electronic Packaging Services (EPS) proposes to develop a commercial instrument for the experimental measurement of out-of-plane thermal displacements in populated mixed mode electronic assemblies. The system will be ...

    SBIR Phase I 1997 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government