You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reusable In Situ AirCore System for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC.            Topic: S108

    A novel design for an in situ atmospheric sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  2. Flexible Tube-Based Network Control

    SBC: THE INNOVATION LABORATORY, INC.            Topic: A301

    The Innovation Laboratory, Inc. builds a control system which controls the topology of an air traffic flow network and the network flow properties which enables Air Traffic Management (ATM) to adapt to hazardous weather constraints and provide high capacity flows in the National Airspace System (NAS). The Network Flow Organizer automatically adjusts the flows of air traffic with respect to weather ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  3. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: X406

    This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very large-scale structures and conventional autoclave-based composites which are very costly and suffer from logistical problems. Out of autoclave (OOA) composite manufacturing technology has the potential to solve the constraint issues of aut ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. Nonhazardous Urine Pretreatment Method for Future Exploration Systems

    SBC: UMPQUA RESEARCH COMPANY            Topic: X302

    A nonhazardous urine pretreatment system prototype is proposed that will stabilize urine against biological growth or chemical instabilities without using hazardous chemicals. Untreated urine fosters biological growth, ammonia off-gassing, creation of bio-solids, and inorganic precipitates, which foul water and air reclamation hardware. The current Russian system employs hexavalent chromium, a s ...

    SBIR Phase II 2009 National Aeronautics and Space Administration
  5. Brine Dewatering Using Ultrasonic Nebulization

    SBC: UMPQUA RESEARCH COMPANY            Topic: N/A

    Recovery of water from brine is critically important for manned space exploration. Resupply of water is prohibitively costly for extended missions. It is anticipated that NASA will pool urine, hygiene water and humidity condensate into a combined waste stream that will subsequently be concentrated into a brine while recovering some but not all of the water, 90-95%. The concentrated brine that r ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Regenerable Lunar Airborne Dust Filter

    SBC: UMPQUA RESEARCH COMPANY            Topic: X202

    Effective methods are needed to control pervasive Lunar Dust within spacecraft and surface habitations. Once inside, airborne transmission is the primary mode of dispersion. Inhalation of this fine powder may pose a serious health risk. Lunar dust may cause degradation of materials, interfere with proper operation of instrumentation & controls, and may prevent formation of adequate seals. To solv ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  7. Innovative Affordable Head-Mounted General Aviation Pilot Information System

    SBC: Avrotec, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  8. Variable Cell Blanket Sandwich Panel Technology

    SBC: Benecor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  9. Suprises and Opportunities

    SBC: EMERGENT TECHNOLOGIES CORP.            Topic: N/A

    Emergent Technologies Corp. (ETC) in conjunction with research partners at West Virginia University has developed and recently patented an innovation antenna that promises to revolutionize the science of antenna design, construction and utilization. The antenna, labeled the Countrawound Toroidal Helical Antenna (CTTHA), offers a number of significant advantages over conventional antennas. The CT ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  10. A Low-Power, Low-Cost electron gun for Microwave Power Modules

    SBC: E BEAM INC            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government