List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Miniaturization of high average power, high peak power, wide bandwidth antennas

    SBC: XL Scientific, LLC            Topic: A16123

    Verus Research is pleased to respond to the A16-123 Army Phase-II SBIR solicitation. To meet the Armys Phase-II requirements in a risk-mitigated fashion, Verus Research will leverage its innovative Ferengi family-of-antennas technology which was conceived, designed, and experimentally demonstrated by Verus Research under the previous Army-funded Phase-I Base A16-123 SBIR effort. For the proposed P ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Inert metal encapsulation of magnetic particles for improved magnetic field effects at fuel cell electrodes

    SBC: ELECTROPHORICS, INC.            Topic: N/A

    "Magnetic field-enhanced electrocatalysis at the hydrogen and air electrodes of PEM fuel cells have reported improved power densities, three-fold over conventional PEMFCs. Leddy, et al. used micron-sized polymer-encapsulated beads of permanent magnetsplaced in conventional inks of carbon-supported platinum electrocatalysts to enhance MEA performance. Their work showed a qualitatively improved CO ...

    STTR Phase I 2002 Department of DefenseArmy
  3. An Ultra-Wideband Antenna Built Into a Parachute

    SBC: FARR RESEARCH, INC.            Topic: N/A

    "On the modern electronic battlefield, a weapon that disables the enemy's electronics can be more useful than a weapon that executes a killing strike. This is possible because a radio frequency (RF) weapon that attacks electronics can be effective over amuch larger radius than a high-explosive (HE) weapon. For example, a single 155-mm artillery shell has a disabling blast radius limited to a few m ...

    SBIR Phase II 2002 Department of DefenseArmy
  4. Benchmark Part for Form, Fit and Functional Testing for the Laser Engineered Net Shaping (LENS) Process

    SBC: OPTOMEC, INC.            Topic: N/A

    During this Phase I effort Optomec will demonstrate that the Laser Engineered Net Shaping (LENS) process provides a viable means for both repair and fabrication of functional prototype components for the MPH needs. This work will serve to establish abenchmark part that can be used for calibration and set up of the LENS equipment, as well as other commercially available RP equipment. The goal of ...

    SBIR Phase I 2002 Department of DefenseArmy
  5. Hybrid Ceramic Composites for Advanced Turbomachinery

    SBC: Thor Technologies, Inc.            Topic: N/A

    "Continuous fiber-reinforced ceramic composites (CFCCs) are inherently wear and oxidation resistant, retain strength at higher temperatures and have lower specific densities than competing metal systems. The hot sections of gas turbine engines and relateddevices are exposed to aggressive gaseous species at high temperature. Because of their thermochemical stability and oxidation resistance, CFCC ...

    SBIR Phase I 2002 Department of DefenseArmy
  6. Ultrasonic Fragmentation of Cast Energetic Materials

    SBC: TPL, INC.            Topic: N/A

    "Demilitarization of obsolete and aging munitions has slowed dramatically with the loss of open burning and open detonation options. This has created a need for a fast, efficient, environmentally acceptable alternative for explosives removal. Toalleviate this problem, TPL proposes the ultrasonic fracturing and removal of cast explosives from shells in a single remote operation. This will be acc ...

    SBIR Phase I 2002 Department of DefenseArmy
  7. VARIATIONAL EVALUATION OF EM COUPLING TO A WIRE INSIDE A CAVITY

    SBC: Applied Physics Technologies            Topic: N/A

    CONTRACTOR WILL DEVELOP A LAGRANGIAN FORMULATION FOR THE ELECTROMAGNETIC RESPONSE OF A METALLIC ENCLOSURE WITH THIN, SLIGHTLY DIFFUSIVE WALLS AND A WIRE SPANNING THE ENCLOSURE. CONTRACTOR WILL FIRST DERIVE A LAGRANGIAN OPERATOR ON THE FIELDS WHICH IS STATIONARY WHEN MAXWELL'S EQUATIONS ARE SATISFIED. THE LAGRANGIAN WILL THEN BE USED TO DETERMINE THE ENCLOSURE EIGENMODES (WIRE INCLUDED) AND THE AMP ...

    SBIR Phase I 1987 Department of DefenseArmy
  8. EMP ENVIRONMENT PREDICTION FOR COLLIMATED SOURCES

    SBC: Applied Physics Technologies            Topic: N/A

    CODES CURRENTLY EXIST THAT WILL CALCULATE THE ELECTROMAGNETIC ENVIRONMENT (EMP) PRODUCED BY A BEAM OF COLLIMATED GAMMA RAYS. THE COLLIMATION MAY BE EITHER CYLINDRICAL OR CONICAL. THE CURRENT EFFORT WILL BE TO INSTALL THE CODES ON AN ARMY CRAY COMPUTER AND TO SET THEM UP AND RUN THEM FOR PROBLEMS OF INTEREST TO THE ARMY.

    SBIR Phase I 1987 Department of DefenseArmy
  9. DEVELOPMENT OF A HIGH RANGE PARTICLE VELOCITY GAGE

    SBC: Applied Research Associates, Inc.            Topic: N/A

    THERE IS AN ESTABLISHED NEED FOR A SIMPLE ROBUST TRANSDUCER TO MEASURE PARTICLE VELOCITY IN SEVERE BLAST AND SHOCK ENVIRONMENTS SUCH AS NUCLEAR AND HIGH EXPLOSIVE TESTS. A GAGE CONCEPT IS PROPOSED FOR DEVELOPMENT, BASED ON THE PROVEN MEASUREMENT PRINCIPLES USED IN THE HIGHLY SUCCESSFUL DX GAGE, BUT RECONFIGURED MECHANICALLY AND ELECTRICALLY TO WITHSTAND THE HARSH SHOCK ENVIRONMENTS. THE CONCEPT RE ...

    SBIR Phase I 1987 Department of DefenseArmy
  10. DEVELOPMENT OF APPROXIMATIONS FOR A FAST-METHOD OF MOMENTS TECHNIQUE BASED ON NORMAL MODES

    SBC: Electro Magnetic            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government