You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Multiferroic Materials for RF Applications
SBC: WINCHESTER TECHNOLOGIES LLC Topic: ST13B003Built upon the progress in Phase I period, Winchester Technologies, LLC is pleased to propose to investigate practical magnetoelectric antennas during the Phase II period based on solidly mounted resonators (SMR), which will have enormous impacts on DoD and civilian antenna applications. State of the art antennas suffer from three major open challenges: (1) large antenna size > ?0/10, (2) antenna ...
STTR Phase II 2019 Department of DefenseArmy -
Scalable Biological Agent Detection Network
SBC: PHYSICAL SCIENCES INC. Topic: A17AT020Physical Sciences Inc., in cooperation with University of Notre Dame, will develop a method for the persistent detection of aerosolized biological warfare agents using a distributed and cooperative sensor network within a Bayesian framework. The proposed system, named BioNet, will provide a wider coverage and two-fold reduction in false alarm rate over individual sensor performance through intelli ...
STTR Phase II 2019 Department of DefenseArmy -
Compressive Spectral Video in the LWIR
SBC: PHYSICAL SCIENCES INC. Topic: A13AT015Physical Sciences, Inc. and Colorado State University will advance the technical maturity of the Compressive Sensing Hyperspectral Imager (CS-HSI) platform. The CS-HSI operates in the longwave infrared (LWIR) spectral range with a single-pixel architecture for low-cost, standoff wide area Early Warning of chemical vapor plumes. The motivation for applying CS to LWIR HSI is to eliminate the high-co ...
STTR Phase II 2019 Department of DefenseArmy -
Millimeter-wave Modulators for Sparse Imagers
SBC: PHASE SENSITIVE INNOVATIONS INC Topic: A18BT017In this Phase I SBIR effort we will develop advanced electro-optic (EO) sensing module that are capable of efficiently up-converting mmW signal into optical sidebands for passive millimeter wave imaging applications. Conversion efficiency of the modulators can be significantly enhanced by virtual of thin-film Lithium niobate on insulator (TFLNOI), RF resonator, and optical resonator, in which the ...
STTR Phase I 2019 Department of DefenseArmy -
Passive Millimeter-Wave Imaging Camera System Using Optical Up-Conversion in Sparse Array Configuration
SBC: NOVAA LTD Topic: A18BT017The objective of this proposal is to enable high-sensitivity, passive imaging system of natural mm-wave emissions, which can be used as standalone or fused with other imaging modality such as conventional IR imagery in degraded environments. This is achieved through a unique antenna integrated electro-optic (EO) modulator, where received mm-wave signals modulate an optical carrier. The optical car ...
STTR Phase I 2019 Department of DefenseArmy -
Rapid Prototyped 3D Printed Filters for CW Agent Protection
SBC: TDA RESEARCH, INC. Topic: A18BT018Defense against chemical weapons is a critical DoD requirement. An effective defense requires the development of unique respirator systems that prevent inhalation of chemical warfare (CW) agents. In addition, the protective equipment exposed to CW agents must not pose a residual hazard after use in the battlefield. Existing respirator canisters remove CW agents, but they do not self-decontaminate ...
STTR Phase I 2019 Department of DefenseArmy -
Application of Natural Fiber Welding to Create MOF-modified Textiles
SBC: Natural Fiber Welding, Inc. Topic: A18BT019Natural fiber welding provides a unique strategy to impregnate fibers, threads, and fabrics with nanostructure materials such as MOFs. The procedure utilizes ionic liquids to slightly dissolve cellulosic structure of the material, making it loose and mobile. Then water is used to remove the ionic liquid, and upon the removal of the ionic liquid, the cellulose structures are comingled and bind to e ...
STTR Phase I 2019 Department of DefenseArmy -
Paper Spray Mass Spectrometry Cartridges with Integrated Sampling and Enrichment
SBC: Nano Terra, Inc. Topic: A18BT020PS-MS is a simple and powerful method for rapid ambient sample preparation. However, its simplicity also means separation of undesirable components (particulates and molecular interferents) is not possible. Furthermore, samples must be collected by other means (e.g., dried blood spot cards) and placed on the ticket in liquid form before analysis. Although the technique is sensitive (nanograms to t ...
STTR Phase I 2019 Department of DefenseArmy -
Sample Preparation Free Consumables for Ultra-Sensitive Chemical and Biological Detection from Complex Environmental and Clinical Matrices Compatible for Paper Spray Ionization Mass Spectrometry
SBC: Prosolia, Inc. Topic: A18BT020Paper Spray mass spectrometry (PSMS) has been developed and commercialized for analysis of fluid samples by mass spectrometry. PSMS provides advantages over existing analysis techniques by reducing sample preparation needs and incorporating the sample storage and sample introduction to a single consumable device that is disposed after analysis, thus eliminating cross contamination and/or cleaning ...
STTR Phase I 2019 Department of DefenseArmy -
Large Scale Nano-Crystalline Coatings For Penetration Resistance
SBC: VRC Metal Systems, LLC Topic: A18BT021The US Army needs an effective method to augment and repair existing armor technologies. Nanoscale metal matrix composite (MMC) materials provide a promising combination of properties and could provide an ideal armor coating for increasing threat severity. Cold spray is a low temperature, solid state method of additive manufacturing that has shown promise for the deposition of hard, MMC materials ...
STTR Phase I 2019 Department of DefenseArmy