Award Data

Our goal in this SBIR project is to develop a lightweight, low-power, inexpensive hyperspectral spectro-polarimetric imaging sensor for wide area standoff detection of chemical agents. The imaging system will employ an acousto-optic tunable filter (AOTF) that operates in the LWIR wavelength range. The sensor will have polarimetric imaging capabilities which, adds a valuable signature feature to im ...

Physical Science Inc. (PSI) will develop a new approach to chemical vapor detection based on a novel open-path sample cell design. The PhaseI system level model predicts SNR supporting a probability of detection of 95% and a MTBFA of 168 hours for all relevant CWAs and TICs at the10 minute negligible MEG level at a 20 s measurement time. In addition to robust detection, the system design can provi ...

In this Phase I SBIR project, Parabon NanoLabs will develop a practical and affordable plan to establish a comprehensive reach-back support system for Rapid DNA analysis.The proposed solution, code-named Rapid-ID, will enhance DHS identity testing and kinship verification capabilities by enabling DNA analysts to review Rapid DNA profiles with OBIM Store/Match/Share software and re-run DNA analyses ...

Currently, there is no analytical reach-back support or Deoxyribonucleic Acid (DNA) laboratory (lab) within Department of Homeland Security (DHS) accredited to review DNA results using the Office of Biometric Identity Management (OBIM) DNA Store/Match/Share capability. The purpose of Phase I is to analyze the feasibility of developing an accredited DHS reach-back capability to review results from ...

Rapid DNA analysis has the potential to be a paradigm shifting technology in the realm of forensic human identification and make DNA the ultimate biometric.Where confirmation of suspects relating to evidence, confirmation of familial relationships in a multitude of applications, or obtaining identification of human remains could have once taken months or years, rapid DNA enables this to be complet ...

Trusted identification and provisioning of public safety individuals is extremely difficult during the chaos and time criticality of emergency response operations. Previously unknown individuals must be verified/vetted/provisioned without the benefit of a thorough face-to-face, manual review. The problem is made worse by the lack of a universally accepted system for identity sharing and coordinati ...

First generation ICAM systems are long overdue for improvements because identity federation and managing access based upon ICAM guidelines during emergencies is still non-existent. Existing ICAM solutions are closed, place onerous restrictions on the trust mechanism, do not account for mobile environments and are static in nature. The innovation proposed will, for the first time, provide the abili ...

The Public Safety Community (Community) would like to share information between jurisdictions, but need to trust with a reasonable certainty that the users viewing this information are who they say they are. Similarly, the Federal government and other organizations need to be reasonably sure that their new users are accessing the right information online. Identity proofing a user, either remotely ...

To address the DHS need for a module that can power/charge and provide effective power management of all on-body electronics including sensors, communications systems, and peripheral devices for all first responder mission areas, Intellisense Systems, Inc. (ISI) proposes to develop a new Power and Rechargeable Battery Interface Smart Module (PRISM). This proposed technology is based on a novel mod ...

First responders use of portable electronic devices including cell phones and radios has increased dramatically over the past decade and will continue to grow with the introduction of new visual augmentation systems, wearable sensors, and mobile computing systems being developed under the DHS Next Generation First Responder (NGFR) Apex program. The large number of powered devices, each with their ...