List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. An Ultrasonic Wireless Sensor Network for Data Communication and Structural Health Monitoring

    SBC: X-Wave Innovations, Inc.            Topic: T12

    Sensor networks embedded on structures, such as pipes, bridges, railways, aircraft wings and fuselage, among others, are required to transfer data related to the health of the structure. This data is typically sent to a central location where it can be processed, displayed, and analyzed. Typical Structural Health Monitoring (SHM) uses embedded ultrasonic transducers exclusively for non-destructive ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: Advanced Space LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Heterogeneous Silicon Photonics OFDR Sensing System

    SBC: Luna Innovations Incorporated            Topic: T8

    Luna will team with Dr. John Bowers of UCSB to continue development of an Optical Frequency Domain Reflectometry (OFDR) system-on-chip using heterogeneous silicon photonics to enable a minimal weight structural health monitoring system. This system-on-chip will be the building block for distributed sensing interrogation systems that are the size of a deck of playing cards. This lightweight, rugged ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  4. Electrical Power from Thermal Energy Scavenging in High Temperature Environments

    SBC: Physical Sciences Inc.            Topic: T3

    Physical Sciences Inc. and Purdue University propose to develop a novel approach to scavenging heat from high intensity thermal environments encountered during space missions and converting this thermal power to electrical power at high efficiency.  Examples include extremely hot heat shields during vehicle entry into planetary atmospheres (Mars/Venus probes) and during high speed ascent thro ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  5. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase I 2019 Department of EnergyARPA-E
  6. A 2-5 MW Supercritical CO2 micro tube recuperator: manufacturing, testing, and laser weld qualification

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

    SBIR Phase I 2019 Department of EnergyARPA-E
  7. Compact Heat Exchanger for High Temperature High Pressure Applications Using Advanced Cermet

    SBC: Comprex, LLC            Topic: N/A

    In this proposal, CompRex, LLC (“CompRex”) seeks to realize a transformational and disruptive advancement in heat exchange technology for high temperature and high pressure applications through 1) the use of advanced metal and ceramic composite material, 2) development of a new simplified manufacturing approach, and 3) optimization of heat exchanger design to maximize the performance benefits ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  8. A 2-5 MW Supercritical CO2 micro tube recuperator: manufacturing, testing, and laser weld qualification

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    Mezzo and its partners will design, manufacture, and test a supercritical CO2 recuperator designed for high pressure of 275 bar and high temperature of 800 0C. The recuperator will incorporate a new manufacturing approach (laser welded micro tubes) that offers potential to reduce cost. It is well known that recuperator costs are currently very high for applications that involve high temperature an ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  9. A Scalable, Mobile M2M/SDP/IoT Architecture to Connect First Responders at the Incident Site

    SBC: BALFOUR TECHNOLOGIES LLC            Topic: HSB0141005

    First Responders need to leverage automated (M2M machine-to-machine), mobile connectivity at an incident site. With connectivity automated through M2M network technology, responders would have much improved situational awareness, and can effectively focus their complete attention on the necessary emergency response actions. We propose to develop a futuristic automated M2M prototype system/architec ...

    SBIR Phase II 2015 Department of Homeland Security
  10. Wireless Physiological and Environmental Monitoring System

    SBC: PHYSICAL OPTICS CORPORATION            Topic: HSB0141004

    To address the DHS need for a single wireless device that will monitor multiple physiological and environmental conditions of and surrounding a first responder, and relay the information to the incident command, Physical Optics Corporation (POC) proposes to advance the new Wireless Physiological and Environmental Monitoring (WiPEM) system proven feasible in Phase I. The novel WiPEM system provides ...

    SBIR Phase II 2015 Department of Homeland Security

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government