Award Data

CONTINUOUS, FULL POWER OPERATION OF HIGH OUTPUT SEMICONDUCTOR DEVICES IS GENERALLY LIMITED BY THE HEAT DISSIPATION CAPABILITY OF THE DEVICE PACKAGE. EXISTING COOLING SCHEMES REQUIRE COOLING PUMPS AND SECONDARY RADIATORS, WHICH LIMITS THE APPLICATION OF THESE DEVICES TO LARGE VEHICLES. THIS PROPOSAL CONCERNS THE ANALYSIS AND DESIGN OF A THERMAL PACKAGE WHICH IS CAPABLE OF DISSIPATING HIGH HEAT FLUX ...

THIS PHASE I SBIR PROGRAM PROPOSES TO DETERMINE THE FEASIBILITY OF USING HIGH-RESOLUTION DIGITAL RADIOGRAPHY (DR), LAMINOGRAPHY, AND COMPUTED TOMOGRAPHY (CT) TO EXAMINE LAMINAR BONDS IN COMPOSITE SAMPLES SUPPLIED BY THE ARMY. THE PROJECT WILL UTILIZE DISCRETE, SOLID-STATE X-RAY DETECTORS DESIGNED AND BUILT BY BIO-IMAGING RESEARCH, INC. THE PHASE I PROGRAM WILL ALSO RECOMMEND A PRELIMINARY DESIGN F ...

WE PROPOSE TO DEVELOP AND VERIFY IN THIS PHASE I PROGRAM A TECHNIQUE THAT WILL ACCURATELY AND REPEATABLY MEASURE SURFACE PROFILES AND DISTANCES BETWEEN A TEST OBJECT AND DETECTORS USING THE SHEARING HETERODYNE INTERFEROMETRY TECHNIQUE. THE TECHNIQUE IS BASED ON SHEARING HETERODYNE INTERFEROMETRY WITH A FREQUENCY MODULATED LASER DIODE USING THE FOUR-BUCKET-INTEGRATING TECHNIQUE. IT CAN BE USED TO D ...

N/A

HEAT EXCHANGE MATRIX THE FUNCTION OF A HEAT EXCHANGER IS DEPENDENT UPON THE AREA OF EXPOSURE TO THE FLUIDS IN PROCESS. FINS ARE COMMONLY USED TO INCREASE EXTERNAL SURFACE AREAS. TO EXTEND THE INNER SURFACE OF A TUBE OR VESSEL IS MORE DIFFICULT AND THERE IS CURRENTLY NO COST EFFECTIVE METHOD TO DO SO. THIS REDEARCH IS TO DEVELOP THE USE OF A MATRIX COMPOSED OF SMALL, HOLLOW, METAL CYLINDERS, BRAZED ...

THE AUDIO-VISUAL INITIAL DEBUG (AVID) METHOD IS PROSPOSED ASA FIRST- LINE SOFTWARE DEVELOPMENT TOOL FOR LOCATING ERRORS IN NEW SOURCE CODE. THE CONCEPT INVOLVES USING A COMPUTERR SPEECH SYNTHESIZER CONNECTED TO THE TERMINAL TO PROVIDE AN AUDIO PLAY-BACK OF THE SOURCE CODE WHILE AS CURRENTLY ENVISIONED IS SPECIFICALLY DESIGNED TO ANALYZE AND SPEAK COMPUTER LANGUAGE. CERTAIN STANDARD AND USER-DEFINE ...

THE DESIGN AND CONSTRUCTION OF A LARGE SCALE SOIL LABORATORY FACILITY CAPABLE OF IMPOSING AXISYMMETRIC STRESSES UP TO 1,000 PSI ON CYLINDRICAL SOIL SPECIMENS AS LARGE AS THREE METERS IN DIAMETER IS PROPOSED. THE OPTION OF PHASED CONSTRUCTION OF A 1-1/2 METER DIAMETER, FOLLOWED BY CONSTRUCTION OF A THREE METER DIAMETER FACILITY IS OFFERED. THE DESIGN WILL INCLUDE ALL ANCILLARY SPECIAL EQUIPMENT TO ...

VARIOUS RADAR AND TARGET SEEKER SYSTEMS ARE BEING DEVELOPED TO OPERATE AT MILLIMETER SYSTEMS. LOW COST, HIGHLY RELIABLE FRONT END HARDWARE IS REQUIRED FOR THESE MUNITIONS. DIELECTRIC INSULAR WAVEGUIDE PLANAR INTEGRATED CIRCUITS FOR THIS PURPOSE WERE DESCRIBED INITIALLY BY EPSILON LAMBDA PERSONNEL IN 1970. SOME OF THESE RADARS ARE OF THE FM-CW TYPE, AND THIS PROPOSAL ADDRESSES THE NEED FOR DEMONSTR ...

CURRENTLY A PRIMARY DRAWBACK OF FIBER OPTIC SYSTEMS FOR MILITARY USE IS THE DIFFICULTY OF REPAIRING AND SERVICING THESE SYSTEMS. THE OBJECTIVE OF THIS PROJECT WILL BE TO DEVELOP TECHNIQUES FOR RAPID, RELIABLE FIELD REPAIR OF FIBER OPTIC CONNECTORS AND CABLES, TO PUT MAINTENANCE OF THESE SYSTEMS ON PAR WITH COPPER WIRE INTERCONNECTIONS.TECHNIQUES FOR RELIABLE HIGH PERFORMANCE TERMINATION OF GLASS F ...

WE PROPOSE IN PHASE I TO DEMONSTRATE, USING AVAILABLE TECHNOLOGY AND RESOURCES, THE FEASIBILITY OF A "PHOTON-GUN" DEMONSTRATOR CONCEPT THAT COMBINES THE INDUCED-DIPOLE STORAGE LASER CONCEPT PIONEERED BY THE SOVIETS IN THE EARLY 1970'S WITH STATE-OF-THE-ART TRAVELING WAVE (OR LASER) INDUCED PULSE EXTRACTION AND THE TRADITIONAL HARDWARE DESIGN STRUCTURE OF AN IDENTIFIABLE PROJECTILE/CARTRIDGE/LAUNCH ...