You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
An Ultrasonic Wireless Sensor Network for Data Communication and Structural Health Monitoring
SBC: X-Wave Innovations, Inc. Topic: T12Sensor networks embedded on structures, such as pipes, bridges, railways, aircraft wings and fuselage, among others, are required to transfer data related to the health of the structure. This data is typically sent to a central location where it can be processed, displayed, and analyzed. Typical Structural Health Monitoring (SHM) uses embedded ultrasonic transducers exclusively for non-destructive ...
STTR Phase II 2019 National Aeronautics and Space Administration -
Efficient cFS-based On-board Lamberts Solution for DSMs
SBC: ADVANCED SPACE LLC Topic: T11Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...
STTR Phase II 2019 National Aeronautics and Space Administration -
Heterogeneous Silicon Photonics OFDR Sensing System
SBC: LUNA INNOVATIONS INCORPORATED Topic: T8Luna will team with Dr. John Bowers of UCSB to continue development of an Optical Frequency Domain Reflectometry (OFDR) system-on-chip using heterogeneous silicon photonics to enable a minimal weight structural health monitoring system. This system-on-chip will be the building block for distributed sensing interrogation systems that are the size of a deck of playing cards. This lightweight, rugged ...
STTR Phase II 2019 National Aeronautics and Space Administration -
Electrical Power from Thermal Energy Scavenging in High Temperature Environments
SBC: PHYSICAL SCIENCES INC. Topic: T3Physical Sciences Inc. and Purdue University propose to develop a novel approach to scavenging heat from high intensity thermal environments encountered during space missions and converting this thermal power to electrical power at high efficiency. Examples include extremely hot heat shields during vehicle entry into planetary atmospheres (Mars/Venus probes) and during high speed ascent through p ...
STTR Phase II 2019 National Aeronautics and Space Administration -
Continuous Monitoring of Natural Gas Infrastructure for Increased Community Resilience using Voltammetric Sensors
SBC: FULLMOON SENSORS, INC. Topic: NoneFullmoon has the first chip-level sensors capable of identifying and quantifying molecules in the air. At the core of our technology are printed voltammetric sensors, which are operated using cyclic voltammetry, an electrochemical technique that probes for the redox potential, a unique signature of molecules. We have demonstrated this sensing principle for the detection of carbon monoxide and meth ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Developing Commercial Quantum Resistance Standard Based on Epitaxial Graphene
SBC: GRAPHENE WAVES, LLC Topic: NoneGraphene Waves proposes to develop a quantum Hall resistance (QHR) standard based on graphene that can be deployed for general electrical calibration in industries. Current QHR standard is based on GaAs/AlGaAs heterostructure and requires expensive liquid helium to operate. The continuous increase in price and unstable supply chain of liquid helium limit the QHR standard to be only affordable by t ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water
SBC: OMNIVIS INC Topic: NoneThis SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Laser Particle Separation
SBC: Opthos Instrument Company, LLC Topic: NoneParman Tech is dedicated to commercializing a NIST technology for sorting nano-particles. This technology uses the force of light to gently guide particles along different paths depending on the size of makeup of each particle.
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations
SBC: QATCH TECHNOLOGIES LLC Topic: NoneThe objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation
SBC: Nvariate, Inc. Topic: NoneModern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology