You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design and Fabrication of the ¿AODS¿: All-in-One Digitizer System-on-chip

    SBC: NALU SCIENTIFIC, LLC            Topic: 29b

    In this project Nalu Scientific will design, develop, and make commercially available the “AODS”, a fast measurement tool to readout high speed signals generated by particles in particle and high energy physics experiments. Detection of individual charged particles and photons and estimation of their properties, momentum, and direction of arrival is the basis for a wide range of scientific and ...

    SBIR Phase I 2019 Department of Energy
  2. Design And Development Of TR-BHM: Time Resolved Beam

    SBC: NALU SCIENTIFIC, LLC            Topic: 09b

    NSL recognizes the need within the accelerator community for robust and accurate beam halo monitoring detectors. Non-idealities in the accelerating equipment, uncertainties in current machine controls, and random noise driven fluctuations all combine to diminish the quality and focus of accelerated charged particle beams which results in degradation of the resulting physics, losses which decrease ...

    SBIR Phase I 2019 Department of Energy
  3. High-Accuracy Angle Generator For Angular Calibrations To Support Optical Metrology Laboratories and Light Source Facilities.

    SBC: VERMONT PHOTONICS TECHNOLOGIES CORP.            Topic: 12a

    Improving our current ability to measure the shape of x-ray focusing mirrors is necessary to advance our knowledge of the atomic structure of many types of materials, especially for the latest diffraction-limited light sources within the DOE. X-ray studies at DOE national laboratories of the atomic structure of new materials, biological molecules, etc. are limited by the quality of the x-ray spot ...

    SBIR Phase I 2019 Department of Energy
  4. Functionalized Composite Nanofiber Membranes for Electrochemical Applications

    SBC: OCEANIT LABORATORIES INC            Topic: 19a

    The separator is a critical component of the battery that impacts both performance and safety. Separator technology is lagging in innovation comparison to cathode/anode chemistries. Current SOTA polyolefin (PO) separator technology is an antique utilizing traditional materials and processes. Moreover, investments in separator development (ARRA & DOE) have been focused on improving the manufacturin ...

    STTR Phase I 2019 Department of Energy
  5. Design and fabrication of Ultrafast Pixel Array Camera (UPAC)

    SBC: NALU SCIENTIFIC, LLC            Topic: 25b

    NSL recognizes the need within the high energy science and inertial fusion to develop ultrafast diagnostics to assess plasma conditions for High Energy Density science and Inertial Fusion experiments. The current limitation of existing measurement tools is in the constraints of streak cameras. Therefore, there is interest in developing ultrafast pixel cameras by reading high speed photo detectors ...

    SBIR Phase I 2019 Department of Energy
  6. SBIR Phase II: Novel, Noninvasive Comprehensive Aquatic TOol (CATO) for Sediment Management in Waterways

    SBC: Akabotics Corp.            Topic: EW

    The broader impact/commercial potential of this project represents a major paradigm shift in the methodology by which waterways can be maintained for optimum usage and water quality. Instead of the status quo in which water quality is only periodically tested and sediment buildups are only removed in massive quantities that can shock sensitive aquatic ecosystems, the system under development offer ...

    SBIR Phase II 2019 National Science Foundation
  7. Silicon Carbide (SiC) Foam for Molten Salt Containment in CSP-Gen3 Systems

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: 18c

    Phase I analysis results show that in order to potentially meet the round trip and exergetic efficiencies as required by the Department of Energy’s Solar Energy Technology Office, for thermal energy storage in concentrated solar plants, a composite of porous silicon carbide and molten salt phase change material is needed.For a 100 megawatt (electrical) concentrated solar power plant with 12 hour ...

    SBIR Phase II 2019 Department of Energy
  8. Acoustic Smart Cement for Well Integrity Diagnostics

    SBC: OCEANIT LABORATORIES INC            Topic: 19b

    Cementing is an integral part of well construction, providing the seal, protection, and support for the casing to maintain barriers that isolate the well.Wells can experience integrity failure due to structural instability in cemented regions due to subsidence and compaction caused by reservoir depletion over the lifetime of the well.Increased knowledge of cement placement, integrity, and conditio ...

    SBIR Phase II 2019 Department of Energy
  9. Bottom Feeder- A Highly Maneuverable Autonomous Underwater Vehicle

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 822

    The Bottom Feeder project is designed to prove out the research done in Phase I using a prototype platform. The prototype will be a full size version of the platform designed during Phase I. The Phase I platform was designed to work in two operational configurations, a highly efficient mode and a highly maneuverable mode, with the ability to switch between them while submerged. The platform is equ ...

    SBIR Phase II 2019 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Precision Heated Tooling for OOA Curing of Thin-Ply Composites

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: T12

    Thin-ply prepregs offer significant improvements in weight reduction, stiffness and overall mechanical properties over traditional composite laminates. nbsp;Thin plies (lt;0.05 mm/layer) suppress or delay crack initiation in loaded composite structures thereby allowing for manufacturing of lighter, stiffer and more durable composite products. Recent thin-ply prepreg materials, consisting of toughe ...

    STTR Phase I 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government