You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ultra-Lightweight, Ultra-Stable RoboSiC Additively Manufactured Lasercom Telescope

    SBC: Goodman Technologies LLC            Topic: H9

    Of interest to JPL, GRC and GSFC are laser communications telescopes (LCTs) with 30 to 100 cm clear aperture, wavefront error (WFE) less than 62 nm, cumulative WFE and transmission loss not to exceed 3-dB in the far field, advanced thermal and stray light design for operation while sun-pointing (3-degrees from the edge of the sun); -20deg; C to 50deg; C operational range (wider range preferred), a ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  2. A Cognitive Communications Protocols Suite for Networked Space Platforms for Autonomous Dynamic Spectrum Co-existence with User-Initiated Service Support

    SBC: Bluecom Systems And Consulting LLC            Topic: T5

    The STTR topic T5.01 envisions Autonomous Communications Systems (ACS) that can be aware of RF environment and the network status and learn from experience to enhance adaptability to nominal/anomalous conditions, self-reconfigure network connections, dynamically maximize performance in response to sensed conditions and mitigate system-level effects of outages and interference. In Phase II, Bluecom ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Next Generation Portable Power Amplifier

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: SOCOM131004

    MaXentric proposes the GAU2x2 wideband power amplifier system. The design combines MaXentric’s wideband RF PA technology with advanced digital signal processing in a single small footprint package. This tight integration is made possible through the extremely high efficiency and low power dissipation. Since very little power is dissipated as heat, the package and heat sink size can be minimized. ...

    SBIR Phase II 2019 Department of DefenseSpecial Operations Command
  4. Integrated Icing Detection Filter for On-Demand Aircraft

    SBC: Continuum Dynamics Inc            Topic: A1

    New classes of aircraft, providing personal, on-demand mobility, are under development and are poised to revolutionize short-duration air travel.nbsp; The impetus for this work comes from advances in electronics and controls, and increases in electric motor power densities.nbsp; As these aircraft are integrated into the transportation system, they will encounter icing conditions that may challenge ...

    SBIR Phase II 2019 National Aeronautics and Space Administration
  5. Light-Curing Structural Tape for In-Space Repair

    SBC: Adherent Technologies, Inc.            Topic: X1203

    NASA has numerous requirements for in-space repair capabilities to aid future missions beyond earth orbit. A subset of these requirements is adhesive patch materials that provide permanent or temporary repair of a wide variety of surfaces with minimal surface preparation and that can operate in the space environment. This work will result in the production of a repair kit for in-space applicatio ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
  6. High-Bandwidth Hybrid Sensor (HYSENS)

    SBC: A-TECH CORPORATION            Topic: S103

    ATA has demonstrated the primary innovation of combining a precision MEMS gyro (BAE SiRRS01) with a high bandwidth angular rate sensor, ATA's ARS-14 resulting in a low-noise, high bandwidth hybrid sensor, or HYSENS in a Phase I SBIR. The primary emphasis in Phase I development was the implementation and real-time demonstration of the sensor fusion algorithms that combined the output from a MEMS g ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
  7. New Analysis and Theory of Deployable Folded Structures


    A recently developed mathematical folding theory has great value for deployable space structures and in situ manufacture of large beams, panels and cylinders. The new technology offers diverse capacity to design, manufacture, and self-assemble periodically folded sheet material. The range of materials includes many customized core materials for laminated panels, cellular habitat walls, structura ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
  8. Advanced Silicone-based Coatings for Flexible Fabric Applications

    SBC: NEI CORPORATION            Topic: X201

    Silicone coatings are the system of choice for inflatable fabrics used in several space, military, and consumer applications, including airbags, parachutes, rafts, boat sails, and inflatable shelters. Commercial silicone coatings with improved mechanical, thermal and physical gas barrier properties are needed for a broad range of space, military, and commercial applications. The phase I program ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
  9. High Performance Avalanche Photodiodes for Photon Counting at 1064 nm

    SBC: Princeton Lightwave, Inc.            Topic: S103

    The need for higher performance fiber optic telecommunications receivers has provided the impetus for substantial progress during the last decade in the understanding and performance of InP-based linear mode avalanche photodiodes (APDs) for the wavelength range from 1.0 to 1.7 um. However, these advances have not been paralleled in the performance and availability of single photon avalanche diode ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
  10. Advanced On Board Inert Gas Generation System (OBBIGS)

    SBC: Valcor Engineering Corporation            Topic: A103

    Valcor Engineering Corporation proposes to develop an advanced On Board Inert Gas Generation System, OBIGGS, for aircraft fuel tank inerting to prevent hazardous in-flight conditions and to mitigate their effect when they do occur. Aircraft fires represent a small number of actual accident causes, but the number of fatalities due to in-flight, post-crash, and on-ground fires is large. The novel OB ...

    SBIR Phase II 2007 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government