You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Tailored Adhesives for High-Strain-Rate Applications

    SBC: UTILITY DEVELOPMENT CORP            Topic: A17111

    UDC proposes to further optimize the formulations developed in the Phase I program to provide high strain adhesives with improved the integrity and reliability of structural bonded joints to reduce the number of bolts needed for a mechanically joined component. This will increase overall performance, including blast and ballistic impact survivability, and allow reduction of fasteners with subseque ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Extremely High Frequency Rail-based Synthetic Aperture Radar

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A17117

    The US Army is seeking a high-resolution, rail-based synthetic aperture radar (SAR) imaging system capable of operating within the 100 – 300GHz frequency range. Wide bandwidth SAR technologies at this frequency range provide the potential for supporting applications that require high-resolution, non-destructive imaging. In response to this opportunity, MaXentric is proposing a rail-based SAR sys ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. C2 Store and Forward

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A13092

    MaXentric is proposing a novel C2 network solution capable of interconnecting wireless devices simultaneously over different wireless technologies (military and/or commercial) either operating in peer-to-peer mode or using a wireless infrastructure. Our solution has the following main components: 1) A novel, hybrid approach to networking in intermittently connected networks, where delay tolerant n ...

    SBIR Phase II 2019 Department of DefenseArmy
  4. Inexpensive, Field-Portable, Rugged, Voltammetric Sensors Based on Functionalized Microporous Membranes, with ppb Sensitivity, Multi-Analyte Discrimination, Microchip Controller and Network-Connected Android Phone Control

    SBC: Ashwin-Ushas Corporation            Topic: A13079

    The government/DoD have a strong need for analysis of environmental pollutants directly in field soil/water, including metal ions, munitions residues, hydrocarbons, PCBs/PFOSs/PFOAs. Current methods, e.g. transport of samples to labs/trailers, or expensive ($7K-$35K), bulky (5kg-20kg) “portable” field instruments, are inadequate. In recent work, this firm has developed unique, field-portable, ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. DEEP LEARNING COGNITIVE TDMA SCHEDULING & ANTI-JAMMING COMMUNICATIONS WITH REAL-TIME JAMMER IDENTIFICATION AND MACHINE-LEARNING CONTROLLED RECONFIGURABLE ANTENNA ARRAY BEAMFORMING

    SBC: Bluecom Systems And Consulting LLC            Topic: A18045

    To address the performance degradation of fixed scheduling policies used by TDMA-based tactical networks in contested and congested environments, a distributed cognitive TDMA scheduling and anti-jamming protocol is proposed. Technical approach consists of: 1. Developing a deep learning (DL) classifier for jammer/interference identification and automatic detection of network congestion that exchang ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. Ultra-flexible high efficiency photovoltaics

    SBC: MPOWER TECHNOLOGY, INC.            Topic: A18067

    Prototypes of ultra-flexible, high efficiency photovoltaic power generation units will be fabricated and tested in two campaigns. Initial batch of 15 units will provide the processing, fabrication and characterization data necessary to evaluate the initial designs. Based on the results of the first batch, a second batch of 20 units will be fabricated and tested. Detailed process, tool and manufact ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. Same Frequency Simultaneous Transmit and Receive Radio for Military and Commercial Applications

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A18017

    To meet the demands of the A17-017 SBIR solicitation (“Same Frequency Simultaneous Transmit and Receive Radio for Military and Commercial Applications”), the MaXentric / FIU team proposes the STaRwAARS (Simultaneous Transmit and Receive with Agile Adjustable Response System), which realize >70 dB transmitter-to-receiver isolation cleverly combining dual-polarization antenna and a custom IC wit ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. An Adaptively Covert, High Capacity RF Communications / Control Link

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A18025

    The solicitation seeks to develop and demonstrate a covert solution for high bandwidth link capacity for agile, airborne platforms through dynamic beam adjustment, and frequency mobility along the 60GHz oxygen absorption line. MaXentric has teamed up with FIU to develop an innovative, efficient, and scalable architecture, which combines a novel wideband phased array antenna design, with an efficie ...

    SBIR Phase II 2019 Department of DefenseArmy
  9. Medical Sensors Powered by Human Generated Energy

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A18061

    To meet the demands of the A18-061 SBIR solicitation (“Medical Sensors Powered by Human Generated Energy”), MaXentric proposes an energy harvesting system that generates power directly from the user’s body. This harvesting system, when integrated with a sensor patch, results in a system with greatly extended continuous use time allowing for application in “prolonged field care” scenarios ...

    SBIR Phase II 2019 Department of DefenseArmy
  10. Ultra-Wideband Ultra-Low Loss Radome for Very Large Antenna Applications

    SBC: UTILITY DEVELOPMENT CORP            Topic: A18087

    During the Phase I program, Utility Development Corporation successfully proved the feasibility of using a syntactic foam based material for the production of an ultra-wideband, ultra-low loss radome for an antennae application. UDC developed and tested formulations that will pass the X-Ku band frequency and withstand 10TW peak power, and a pulse length and frequency of 30ns and 500Hz. In the Phas ...

    SBIR Phase II 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government