Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Next Generation Portable Power Amplifier


    MaXentric proposes the GAU2x2 wideband power amplifier system. The design combines MaXentrics wideband RF PA technology with advanced digital signal processing in a single small footprint package. This tight integration is made possible through the extremely high efficiency and low power dissipation. Since very little power is dissipated as heat, the package and heat sink size can be minimized. In ...

    SBIR Phase II 2019 Department of DefenseSpecial Operations Command
  2. Programmable Multi-Frequency Transmitter

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: MDA16T005

    To meet the demands of the MDA16-T005 STTR solicitation, the MaXentric/UTK team proposes the MaXPMFT, which exploits a wideband software defined radio architecture to create a transmitter with programmable output frequency. The flexible system will provide the ideal solution for current and future missile flight test telemetry needs through its compatibility with nearly all missile platforms and s ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  3. Innovative CubeSat Payloads for USSOCOM Space Missions

    SBC: A-TECH CORPORATION            Topic: SOCOM17003

    Small satellites have proven capable and cost effective, and innovative payloads and technologies will expand the mission space that CubeSats can support. ATA proposes to build a CubeSat-sized laser communications prototype payload, adapting high photon efficiency optical communications techniques to achieve data transfer rates up to 100 mega-bits per second (Mbps) with the small apertures require ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  4. Closed-Cycle ElectriCOIL Technology

    SBC: CU AEROSPACE L.L.C.            Topic: N/A

    The primary objective of CU AerospaceOs Phase II engineering work will be to develop all-gas-phase closed-cycle electrically assisted chemical laser COIL (ElectriCOIL) technology. CU Aerospace (CUA) and the University of Illinois at Urbana-Champaign(UIUC) believe that this challenge can be surmounted with changes to gain generator research including 1) radically new, electrically driven O2(1D) ge ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  5. Epitaxial Lateral Overgrowth of GaN in Large Area MOCVD Reators

    SBC: EMCORE CORP.            Topic: N/A

    It is unlikely that large area, cost effective, bulk GaN substrates will be commercially available in the near future. The objective of this proposal is to develop large area (>3-4

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  6. Superlattice Materials for Very-Long Wavelength Infrared Detectors (VLWIR)

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    The fabrication of large format, highly sensitive focal plane arrays (FPAs) sensing at very long wavelengths in the infrared region (VLWIR), i.e. beyond 15um, is highly desirable for the Air Force's space-based applications. Currently, only limited typesof arrays such as 256 X 256 Si:As are available in this spectral region. However, these extrinsic detectors suffer from several fundamental limita ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  7. Innovative Onboard Power and Cooling Solutions

    SBC: Innovative Power Solutions, LLC            Topic: N/A

    Directed Energy Weapons as well as sophisticated countermeasure systems, require substantially more electrical power than the conventional aircraft power system can currently supply. The cooling required to dissipate the energy is currently not availableon these aircrafts. This solicitation is pursuing a continuous electrical output of 1.0 MW of 3 phase, 110 VAC at 400 Hz, in addition to 800 lbs/ ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  8. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly


    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  9. High Temporal and Spatial Resolution Laser Beam Diagnostic Sensor

    SBC: Kestrel Corporation            Topic: N/A

    Kestrel Corporation, with our Phase I collaborator Boeing-SVS, investigated an application of optical remote sensing to measure the spatially distributed, time varying spectral signature characteristics of a high energy laser against a distant target.This highly successful effort clearly demonstrated that the technology has the potential for satisfying the requirements of high resolution beam diag ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  10. High Energy Laser Diagnostics for Space Based Applications

    SBC: Kestrel Corporation            Topic: N/A

    Under a highly successful Phase I SBIR, the Kestrel Corporation investigated an adaptation of a new technology that demonstrated the ability to provide a compact laser wavefront diagnostics sensor that has the ruggedness needed for a high power space basedapplication. This application of this unique sensor provides a large dynamic range, sensitive MWIR wavefront measurement that includes tip and ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government