You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Isocyanate-Free Polyurethane Resins for One-Component, Ambient-Cure Coatings

    SBC: RENUVIX LLC            Topic: 15NCER04

    The Phase I project showed that novel urethane-functional (NUF) resins could be produced that were free of isocyanates and very useful for one-component, ambient-cured (OCAC) coatings. Resins for OCAC coatings, which are expected to be valued at $5.7 billion by 2019, are used to produce a variety of coatings including oil-based paints, wood stains, varnishes, and aerosol paints._x000D_ Phase I re ...

    SBIR Phase II 2017 Environmental Protection Agency
  2. A LevelSet / XFEM Approach for Topology Optimization of Thermally Loaded Structures

    SBC: Lateral Unbounded Software LLC            Topic: AF17AT015

    The automotive and aerospace industries use topology optimization to minimize structural weight while satisfying functional constraints. However, the industry-standard fictitious material or density approach has been less effective when applied to physics beyond simple structural mechanics. Known issues include: failed numerical convergence or so-called gray material in computed optimal designs, n ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. Fiber-Coupled Hyperspectral Thermal LWIR Imaging Sensor Suite for Combustion System Diagnostics

    SBC: SPECTRAL ENERGIES LLC            Topic: AF17AT016

    The objective of the proposed Phase-I effort by Spectral Energies LLC is to design and develop a fiber-coupled hyperspectral LWIR thermal imaging sensor suite for temperature measurements in practical combustors. The proposed sensor suite will be capable of performing spectrally resolved imaging to achieve accurate temperature measurements in practical gas-turbine engines while resolving optical i ...

    STTR Phase I 2017 Department of DefenseAir Force
  4. Spiral: A Framework for Chaotic Sensitivity Analysis and Optimization

    SBC: Lateral Unbounded Software LLC            Topic: AF17AT017

    Computational design is encountering barriers due to chaotic dynamics. The characteristic unpredictability, aperiodicity, and sensitivity to initial conditions in chaotic dynamics requires computationally costly time-dependent analysis. Computationally costly analysis precludes sampling-based optimization, indicating that chaotic systems would significantly benefit from gradient-based optimization ...

    STTR Phase I 2017 Department of DefenseAir Force
  5. Adaptive Materials for SHM

    SBC: AURA TECHNOLOGIES, LLC            Topic: AF17AT018

    Bennett Advanced Research proposes to examine fundamental properties of adaptive materials for use with Additive Manufacturing technologies. The focus will be on developing a system for spacecraft Self Health Monitoring (SHM).

    STTR Phase I 2017 Department of DefenseAir Force
  6. KHz-MHz Rate Laser-Based Tracking of Particles and Product Gases for Multiphase Blast

    SBC: SPECTRAL ENERGIES LLC            Topic: AF17AT020

    The overall goal of the proposed research program is to design a ruggedized imaging system capable of visualization and analysis of the particle field and product gases in a multiphase blast. This will be accomplished by combining kHz-MHz-rate burst-mode laser technology with tomographic particle image velocimetry (PIV) and new nonlinear particle tracking methods to resolve dense particle fields. ...

    STTR Phase I 2017 Department of DefenseAir Force
  7. High-Quality AlGaN Substrates for Optical and Electronic Applications

    SBC: KYMA TECHNOLOGIES, INC.            Topic: AF17AT024

    Kyma Technologies, the leading domestic supplier of crystalline III-N substrate materials, is teamed with leading AlGaN materials & device experts at Sandia National Laboratory, to develop high-quality AlGaN templates in Phase I and free-standing AlGaN substrates in Phase II. Understanding that the commercialization potential of AlGaN templates and substrates requires a cost-effective and diameter ...

    STTR Phase I 2017 Department of DefenseAir Force
  8. Experimentally Derived Scaling Laws from Spatiotemporally Resolved Measurements in High-Pressure Combustors

    SBC: SPECTRAL ENERGIES LLC            Topic: AF16AT15

    The objectives of this research effort are to experimentally derive the scaling laws up to 30 bar for key combustion species and temperature for reactions involving various hydrocarbon fuels in such a way so that the spatio-temporally resolved measurements would not be influenced by signal-degrading processes such as quenching, photolytic interference, Stark shift, and stimulated Raman. This build ...

    STTR Phase II 2017 Department of DefenseAir Force
  9. Robust Ionic Liquid Electrolytes for Reversible Electroplating of Mirrors

    SBC: Faraday Technology, Inc.            Topic: AF16AT20

    This proposal addresses the need for development of room-temperature ionic liquids (RTILs) for use in electrolytes for reversibly electroplating films with specific optical, emissive and electrical properties on demand. Target applications for these electrolytes are devices using reversible electroplating for tuning/regenerating functional surfaces, such as mirrors or thermal emitters, deployed on ...

    STTR Phase II 2017 Department of DefenseAir Force
  10. Additive Manufacturing Technique for Replacement of Complex Castings

    SBC: RENAISSANCE SERVICES INC            Topic: AF161010

    ABSTRACT: Support for legacy aircraft systems is critical to the warfighter. The Air Forces sustainment responsibilities encompass thousands of airframes and engines, representing some systems that have been out of production since the 1960s and 1970s. Among the most critical out-of-production components are those made from aluminum, steel, and magnesium castings. These castings are essential t ...

    SBIR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government