You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Isocyanate-Free Polyurethane Resins for One-Component, Ambient-Cure Coatings
SBC: RENUVIX LLC Topic: 15NCER04The Phase I project showed that novel urethane-functional (NUF) resins could be produced that were free of isocyanates and very useful for one-component, ambient-cured (OCAC) coatings. Resins for OCAC coatings, which are expected to be valued at $5.7 billion by 2019, are used to produce a variety of coatings including oil-based paints, wood stains, varnishes, and aerosol paints._x000D_ Phase I re ...
SBIR Phase II 2017 Environmental Protection Agency -
Integrated Cookstove-Heating-Electricity Generation for Small homes- Integrated cooking, heating, and electric power generation
SBC: ASAT, INC. Topic: 15NCER02_x000D_Currently available biomass heating/cooking stoves in Asia and in the USA do not efficiently cook food or heat houses while consuming too much fuel and emitting pollution, resulting in respiratory illnesses and premature death. ASAT specializes in the development and manufacturing of clean burning biomass stoves. In SBIR Phase I, ASAT developed a low emission, fuel efficient Integrated Heat ...
SBIR Phase II 2017 Environmental Protection Agency -
Low-light-level SWIR Vision System
SBC: VOXTEL, INC. Topic: AF171081To continue to provide our military a nighttime advantage, near-photon-counting passive-image sensors are required that detect very low signal levels, yet have the dynamic range to handle the large intrascene dynamic range of modern urban combat, nap-of-t
SBIR Phase I 2017 Department of DefenseAir Force -
NIIRS 9 Small Unmanned Aircraft System (SUAS) 5-Inch Gimbal
SBC: TRILLIUM ENGINEERING LLC Topic: AF171119Trillium has recently demonstrated the capability to capture NIIRS 9 imagery including the ability to read a license plate from up to 1800 slant range in their 8 diameter HD80 gimbal. This proposal includes an effort to miniaturize Trilliums exi
SBIR Phase I 2017 Department of DefenseAir Force -
Tracking and Assessing Learner Engagement Toolkit (TALENT)
SBC: EDUWORKS CORPORATION Topic: AF17AT009The U.S. Air Force trains and educates a large and diverse workforce to meet requirements across a complex array of missions. Early-stage training in many Air Force Specialty Codes can consist of large corpora of foundational, static material, so training that motivates airmen is a necessary element in helping ensure a supply of qualified personnel in mission-critical areas like aerospace maintena ...
STTR Phase I 2017 Department of DefenseAir Force -
High-gain Low-excess-noise Linear-mode APD for Small-pitch Ladar
SBC: VOXTEL, INC. Topic: AF171118To address the need for scalable, large-format ladar sensors, a robust, compact, ultra-low-noise avalanche photodiode (APD) technology will be developed. The high-gain low-excess-noise APD is based on a cascade of low-noise gain stages that promote determ
SBIR Phase I 2017 Department of DefenseAir Force -
Direct Measurement of Targeting Coordinates from Small Unmanned Aerial Systems (SUAS) EO/IR Gimbal Systems
SBC: TRILLIUM ENGINEERING LLC Topic: AF171120The objective of this proposal is to develop prototype algorithms and hardware, using Trilliums family of gimbals, to demonstrate the feasibility of obtaining high quality measurement of targeting coordinates from a gimbal operating on a Small Unmanned
SBIR Phase I 2017 Department of DefenseAir Force -
InGaAs Focal-plane Arrays for Coherent Ladar
SBC: VOXTEL, INC. Topic: AF171129A 64 x 64-format InGaAs short-wavelength-infrared (SWIR) focal-plane array (FPA) consisting of pixel elements sized 40 microns or smaller, with near 100% fill factor and high quantum efficiency (QE) in the 1 1.7-micron spectral range will be developed
SBIR Phase I 2017 Department of DefenseAir Force -
Additive Manufacturing Plastic Materials with Improved Dielectric Breakdown Strength
SBC: VOXTEL, INC. Topic: AF15AT07In this Phase II program, Voxtel will design, manufacture, and benchmark-test additive-manufactured (AM) insulators capable of electrical stress greater than 25 kV/mm, for use in high-electric-field applications, such as high-power microwave (HPM) devices. These insulators will sustain vacuum of 10-7 Torr and withstand 20 psi of pressure. To achieve this goal, Voxtel will synthesize readily additi ...
STTR Phase II 2017 Department of DefenseAir Force