You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Isocyanate-Free Polyurethane Resins for One-Component, Ambient-Cure Coatings

    SBC: RENUVIX LLC            Topic: 15NCER04

    The Phase I project showed that novel urethane-functional (NUF) resins could be produced that were free of isocyanates and very useful for one-component, ambient-cured (OCAC) coatings. Resins for OCAC coatings, which are expected to be valued at $5.7 billion by 2019, are used to produce a variety of coatings including oil-based paints, wood stains, varnishes, and aerosol paints._x000D_ Phase I re ...

    SBIR Phase II 2017 Environmental Protection Agency
  2. Mobile Analytical Platform for Lead Detection in Drinking Water

    SBC: NANOSAFE, INC.            Topic: 16NCER4C

    As recent crises in Flint, Michigan and Washington D.C. have demonstrated, elevated lead levels (ELL’s) can very suddenly and unexpectedly be introduced to water supplies through seemingly unrelated water system alterations. Ingestion of even trace amounts of lead can have detrimental permanent health effects, especially in children; the public is rightly concerned about lead content in the wate ...

    SBIR Phase I 2017 Environmental Protection Agency
  3. High Strain Composite Testing Methodologies

    SBC: MC Technologies LLC            Topic: AF17AT019

    An innovative loading stage design based on the principle of eccentric loading is proposed for mechanical testing of thin composites to impart precise mixtures uniaxial and bending stresses. In contrast to alternative designs, the mechanism is fully compatible with advanced experimental techniques such as three-dimensional digital image correlation (3D-DIC) strain measurements and in situ micro X- ...

    STTR Phase I 2017 Department of DefenseAir Force
  4. Automated Warhead Classification

    SBC: McQ Inc.            Topic: AF161003

    ABSTRACT: The current procedures for ground based arena tests are time consuming and costly, while only producing a fraction of the desired data. In the current method, the device under test is surrounded by switch screens to record fragment impact time and bundles of foam insulation to capture fragments. Fragments must be recovered by hand to be weighed and measured, requiring weeks of labor. Thi ...

    SBIR Phase I 2017 Department of DefenseAir Force
  5. User Defined Operational Picture (UDOP) for Enterprise Ground Satellite Command and Control Systems from Multiple Sources

    SBC: SONALYSTS INC            Topic: AF162005

    Sonalysts, Inc. proposes to research and develop a Common User Defined Operational Picture (UDOP) for the Enterprise Ground System (EGS) for satellite Command and Control (C2). We will research and analyze the human factors affecting operator function and performance across multiple satellite systems, and the common and unique aspects of space systems currently in use. We will develop logical cons ...

    SBIR Phase I 2017 Department of DefenseAir Force
  6. High-Efficiency Radiation-Hard Solar Array Interface to Spacecraft Power System

    SBC: CUBIC AEROSPACE, LLC            Topic: AF162007

    Electric orbit-raising offers significant advantages to GEO spacecraft users and operators. Electric propulsion decreases the required spacecraft fuel mass by as much as 90%, and enables the elimination of large tanks, thrusters, valves, and other propulsion subsystem components when a conventional hydrazine or bi-propellant system is not required. These optimizations can reduce the launch mass ...

    SBIR Phase I 2017 Department of DefenseAir Force
  7. Distributed Position Sensing for 3D Surface Deformation in Wind Tunnels

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: AF171007

    High-definition fiber optic sensing will enable accurate, real-time 3D measurement of position, attitude, and surface deformation of test surfaces in the wind tunnel environment. Lunas position sensing cable measures its 3D position and orientation, d

    SBIR Phase I 2017 Department of DefenseAir Force
  8. Development and Feasibility Demonstration of an Automated Active Damper Sting

    SBC: VIGYAN INC            Topic: AF171008

    Unwanted vibration of heavy, sting-mounted, cantilevered models is an ongoing issue for wind tunnel facilities. Unsteady flow generated on models can result in vibration and oscillation of the model support system. Such vibration can result in compromised

    SBIR Phase I 2017 Department of DefenseAir Force
  9. Orbit Passive Estimation by an RF Array (OPERA)

    SBC: EXPEDITION TECHNOLOGY, INC.            Topic: AF171026

    Expedition Technology and Applied Defense Solutions propose OPERA, a passive, distributed antenna array to achieve an autonomous, 24/7 LEO and GEO satellite RF tracking and fingerprinting capability for a recurring price less than $500K. A distributed ant

    SBIR Phase I 2017 Department of DefenseAir Force
  10. Training for Cyber Operations

    SBC: SONALYSTS INC            Topic: AF171029

    The Air Force has identified the need for an interactive and immersive trainer simulator environment that can support an array of instructional capabilities, accurately represent the cyber environment, and not only train cyber operators on current systems

    SBIR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government