List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. (TOP JOB)

    SBC: Applications Resources Inc            Topic: N/A

    PHASE I OF THIS PROPOSAL WILL DEFINE THE PARAMETERS ATTENDANT IN THE DEVELOPMENT OF A SATELLITE JAMMING SYSTEM. THE TARGETS FOR SUCH A SYSTEM MAY BE SPACEBORNE, AIRBORNE, OR GROUND DEVICES AND THE RD SPECTRUM WILL BE THAT OF BOTH CURRENT AND UPCOMING WEAPONRY. THE FIGURE OF EMRIT WILL BE THE PENETRATOR EXPOSURE AND SURVIVABILITY. THE TECHNIQUE OF SIDELOBE JAMMING FROM ORBIT WILL REQUIRE CONSIDERAT ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. 3-Dimensional, high-Z graded alloy additive manufacturing for ICBM applications

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: AF161080

    ABSTRACT: In this Phase I program Advratech (prime) will work with Resonetics and Wright State University (subs) to improve upon the current state-of-the-art for selective laser melting (SLM) additive manufacturing (AM) of high-Z (high-Z = high atomic mass) materials by developing high- to low-Z graded materials, alloyed in situ, to produce light weight structural ICBM components with integrated r ...

    SBIR Phase I 2016 Department of DefenseAir Force
  3. 3-Dimensional, high-Z graded alloy additive manufacturing for ICBM applications

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: AF161080

    In Phase I, UTC successfully demonstrated the ability to build 3D, high-to-low-Z graded alloys (GA) with Selective laser melting (SLM) additive manufacturing (AM) techniques. In Phase II, UTC will fully automate and scale-up the GA AM process, and work with Lockheed Martin Corp. (LMCO) and Southern Research (SR) to fully characterize the process so components intended for use on LMCO missile syst ...

    SBIR Phase II 2017 Department of DefenseAir Force
  4. 3D ENGINEERING WORKSTATION FOR CONNECTED SIMULATIONS

    SBC: UES, Inc.            Topic: N/A

    A 3D Connected Simulation will be developed, which can properly address process design and material behavior at two possible levels of simulations, namely: (1) isolated simulation, and (2) connected simulations. The detailed simulation considers the isolated processes of netshape forging, quenching and machining. The connected simulation will consider the connected sequence of Forging, Heat Tre ...

    SBIR Phase I 1998 Department of DefenseAir Force
  5. 3D Simulation of Laser Additive Manufacturing [3D-SLAM]

    SBC: Applied Optimization, Inc            Topic: N/A

    Applied Optimization proposes to develop 3D Simulation of LAM, and verify its accuracy by correlating its results with microstructure data at the Boeing Phantom Works, for parts that are different from each other in terms of substrate and rib thicknesses,and build height. The simulation will model laser-powder-substrate interaction, using a combined analytical-numerical approach, such that it is t ...

    SBIR Phase I 2003 Department of DefenseAir Force
  6. 3D Simulation of Laser Additive Manufacturing to Predict Effect of Processing Parameters and Occurrence of Defects

    SBC: Applied Optimization, Inc            Topic: AF03117

    Applied Optimization proposes to complete the development of 3D Simulation of Ti-6Al-4V LAM, and demonstrate the capability by comparing the simulation results with those from a series of laser deposition trials. These trials will be performed on parts that are representative of the F-15, F-22 and C-17 components, and are of near term interest to the U.S. Air Force. The work will be performed in p ...

    SBIR Phase II 2004 Department of DefenseAir Force
  7. 3D Tomographic Reconstruction of Flow Fields for Spatio-Temporal Resolved Measurements in Augmentors

    SBC: Spectral Energies, LLC            Topic: AF083102

    The objective of this research effort is to develop a 3-D tomographic reconstruction strategy along with user-friendly software for providing spatially and temporally resolved temperature and H2O concentration data cubes in augmentor flow fields at rate of 50 kHz. This strategy model will be validated in a laboratory turbulent flame and demonstrated in the augmentor test-rig at Air Force Research ...

    SBIR Phase II 2010 Department of DefenseAir Force
  8. 3rd Party Intellectual Property (I V&V Effort)

    SBC: Edaptive Computing, Inc.            Topic: AF171046

    Our proposal specifically addresses the stated requirements of the solicitation; we will develop and deploy tools, methods, and models for enhancing the mission assurance of our nations embedded computing systems. As designs continue to progress in com

    SBIR Phase I 2017 Department of DefenseAir Force
  9. 40% Efficiency Concentrator Space Solar Cell

    SBC: Essential Research, Inc.            Topic: N/A

    Currently, tandem solar cells are used for high-performance space power generation and achieve conversion efficiencies approaching 25%. Relative to single-cell technology, the higher production costs of tandem cells are more than offset by their higher efficiency, and consequential reduction in array size and weight. The traditional tandem cell design is far from optimal, however. The bandgaps ...

    SBIR Phase I 1998 Department of DefenseAir Force
  10. 400 Hz AC Generator/Cycloconverter using Switched Reluctance Technology for Aircraft Retrofit/Upgrade Applications

    SBC: Leland Electrosystems, Inc.            Topic: N/A

    Propose to undertake research to establish the feasibility of generating 400 Hz AC using an SRM generator/cyclonconverter. Feasibility of this concept will be established in two phases. In the first phase a computer model of the switched reluctance machine and the converter/cycloconverter will be developed. During the modeling process the control algorithms required to generate 400 Hz AC using the ...

    SBIR Phase II 1995 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government