Award Data

A multi-band airborne synthetic aperture radar and ground moving-target indicating (SAR/GMTI) radar system will be designed and developed that will utilize multiple frequency bands to improve the radar imaging and target detection performance in various clutter environments. Applied Radar’s existing wideband digital receiver/exciter (DREX) hardware is inherently capable of supporting radar appli ...

This Phase I SBIR Project is aimed at determination of the technical feasibility and commercial viability of an Avian Infrasound Detection (passive) and Denial (active and non-lethal) System (AVIDDS) using infrasound energy. The primary purpose of the AVIDDS is system is collision avoidance between aircraft and birds during daily flight operations without impacting mission requirements through det ...

The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

N/A

The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

Carbon seals generlly used for bearing compartments will incrasingly become unsuitable for future gas turbine engines with higher buffer air temperatures, higher pressur and rotor surface speeds.Phase I effort will focus on a synergistic approach including advanced materials and design.Three materials including a (Ti,Mo)(C,N) cermet, B-C composite and a current high temperature grade carbon MAT-12 ...

APPLICATION OF ADVANCED ORGANIC COMPOSITE AT CRYOGENIC TEMPERATURE IS OF CURRENT INTEREST. HOWEVER, RELATIVELY LIMITED DEVELOPMENT WORK HAS BEEN DONE IN THIS AREA. OUR UNDERSTANDING OF THE MECHANICAL AND CHEMICAL BEHAVIOR OF AN ORGANIC COMPOSITE MATERIAL AT CRYOGENIC ENVIRONMENT IS SOMEWHAT LACKING. IN ORDER TO UNDERSTAND THE FUNDAMENTAL MECHANISMS THAT AFFECT THE PERFORMANCE OF AN ORGANIC COMPOSI ...

THE USE OF TOXIC CHEMICALS DERIVED FROM METALS SUCH AS STRONTIUM, CALCIUM AND LEAD AS ANTI-CORROSIVES IN PAINT AND ADHESIVE BOND PRIMERS FOR ALUMINUN ALLOYS IS A WELL ESTABLISHED TECHNOLOGY. HOWEVER, USE OF CERTAIN TYPES OF "SURFACE ACTIVE AGENTS" SUCH AS ORGANO METALLIC COMPLEXES, QUATENARY CHELATING AGENTS AND GUANIDINES AND THEIR DERIVATIVES FOR CHEMICAL ANTICORROSION PURPOSES HAS REMAINED RELA ...

Use of chromates as corrosion inhibi.tors in coatings, adhesives and sealants is a well established technology. However, toxicity and waste disposal problems have led to the urgent need for development of an environmentally benign substitute for chromium compounds in coatings and sealants, which is the subject of this SBIR. This pa'per discusses the state-of-the-art technical approaches to the sol ...