List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. (IHE) FORMULATIONS

    SBC: Thermex Energy Corp            Topic: N/A

    APPROXIMATELY 15 YEARS AGO THE U.S. MILITARY EVALUATED COMMERCIAL SLURRY EXPLOSIVES. AT THAT TIME SLURRY EXPLOSIVES WAS IN ITS INFANCY. STANDARD OFF THE SHELF PRODUCTS WERE EVALUATED. FOR MANY REASONS (STORAGE PROBLEMS, CORROSIVITY, TEMPERATURE LIMITATIONS, PERFORMANCE, SENSITIVITY) SLURRIES WERE CATEGORICALLY LABELED UNSUITABLE. OFF THE SHELF COMMERCIAL SLURRIES WILL NEVER BE PARTICULARLY SUITED ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. 3-Inch Miniature Stabilized Gimbal Laser Pointing System

    SBC: Ascendant Engineering Solutions, LLC            Topic: AF141130

    ABSTRACT: Ascendant Engineering Solutions (AES) proposes to build upon the modeling and analysis and conceptual design effort from the execution of its Phase I and II MSGLPS contracts to develop a 3" flight-worthy form-fit-function Key Technology Demonstrator system during a Phase II contract. The primary objectives are to: 1) Precisely point and hold a laser spot on a target; 2) Safely control th ...

    SBIR Phase II 2016 Department of DefenseAir Force
  3. 3D Printing with Recycled Water Bottles for Air Force Applications

    SBC: RE3D INC.            Topic: AF191005

    With domain expertise in large-scale 3D printing, re:3D has developed a pellet extrusion 3D printer capable of printing with polyethylene terephthalate (PET) flake as well as non uniform pellets. This effort includes developing the ability to consistently dry and to easily clean & switch between materials and/or introduce additives for polymer reconstitution. A novel mechanism for feeding larger v ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. 90nm Low-Power Radiation-Hardened Metal-Programmable System-on-a-Chip

    SBC: Silicon Space Technology Corporation            Topic: AF083189

    Silicon Space Technology (SST) working with Texas Instruments (TI) proposes to demonstrate a 90nm low-power radiation-hardened (RH) metal-programmable system-on-a-chip (SOC) cell library. This will be accomplished by defining, designing, simulating and laying out a demonstration circuit that could eventually be turned into a commercial product. A base slice will be developed upon which the demonst ...

    SBIR Phase II 2010 Department of DefenseAir Force
  5. A Balloon Assisted Launch System

    SBC: Winzen Engineering, Inc.            Topic: N/A

    This innovation proposes the use of a thin film stratospheric balloon to lift a launch vehicle with a payload to an altitude above most of the Earth's atmosphere, then ignite the launch vehicle rocket motor. It will have the capability to carry the payload to its final destination, either into Earth orbit or to the mission design goal. This launch system will eliminate the first stage rocket thr ...

    SBIR Phase II 1996 Department of DefenseAir Force
  6. A Balloon Assisted Launch System

    SBC: Winzen Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  7. A Cold-Atom Gyroscope with Low-Noise, High-Stability Control Electronics

    SBC: Lynntech Inc.            Topic: AF083219

    Lynntech Inc. in collaboration with the ultra cold atomic physics lab at the University of Virginia proposes to implement a compact cold atom interferometer using a novel ring electromagnetic trap to perform precision rotation measurements. Currently, the cold atom laboratory operates a functional Bose Einstein Condensate (BEC) interferometer with coherence times up to 0.1 sec using a linear waveg ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. A Comprehensive System for the Prevention and Remediation of Biofilms in Dental Equipment

    SBC: Lynntech Inc.            Topic: N/A

    There is a substantial body of evidence demonstrating that biofilms growing inside the water lines of dental units pose a significant risk as a source of infection. The problem has been recognized by practitioners, regulators, manufacturers, and the ADA, with the ADA proposing a set of guidelines for water quality that include a limit of 200 colony forming units per milliliter for the year 2000. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  9. A Computer Model for Lung Pressure Transient Prediction

    SBC: Biodynamic Research Corporation            Topic: N/A

    Biodynamic Research Corp (BRC) proposes to conduct a research study aimed at measuring and modeling dynamic gas flows and pressures in the human lung in response to rapid decompression. The program would produce new research on flow-pressure response (impedance) of the human lung to dynamic overpressure at ground level and altitude, both with and without imposed breathing resistance; attempt to e ...

    SBIR Phase I 1998 Department of DefenseAir Force
  10. A Design Improvement Study for the CFTF Centrifuge

    SBC: Biodynamic Research Corporation            Topic: N/A

    The CFTF Centrifuge at Armstrong Laboratory will be a useful tool for crewmember training and human factors research for future high performance aircraft. The centrifuge features an accelearation of performance that is unmatched by other Air Force facilities, however, it lacks a set of powered gimbals that would allow positioning of the rider with respect to acceleration. With these additional d ...

    SBIR Phase I 1997 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government