You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. STRUCTURE REPAIR

    SBC: Abaris            Topic: N/A

    ABARIS PROPOSES A DEVELOPMENT EFFORT TO RESEARCH THE PROBLEM AND CONCEPTUALIZE AN EXPERT SYSTEM TOOL FOR JOB AIDING OF THE REPAIR OF ADVANCED COMPOSITE AIRCRAFT STRUCTURE. THE SYSTEM WOULD CONSIST OF EXPERT SYSTEMS SOFTWARE, KNOWLEDGE OF AIRCRAFT COMPOSITE DESIGN, INSPECTION, AND REPAIR TECHNIQUES, STRUCTURAL ANALYSIS TOOLS, COMPUTER AIDED DESIGN ENGINEERING DATA BASE, AND VIDEO DATA STORAGE SYSTE ...

    SBIR Phase I 1985 Department of DefenseAir Force
  2. ULTRASONIC INSPECTION

    SBC: Abaris            Topic: N/A

    ABARIS PROPOSES TO DEVELOP A PORTABLE EXPERT SYSTEM THAT WILL AID THE FIELD OR ORGANIZATIONAL TECHNICIAN IN THE INTERPRETATION OF ULTRASONIC NON-DESTRUCTIVE INSPECTION FOR THE DETERMINATION OF THE SCOPE, MAGNITUDE, AND IMPACT OF INTERNAL DAMAGE TO COMPOSITE LAMINATE STRUCTURE. ONE OF THE MAJOR PROBLEMS FACING THE AIR FORCE IS THE IMPACT OF NEW ADVANCED COMPOSITE STRUCTURAL MATERIALS ENTERING OPERA ...

    SBIR Phase I 1985 Department of DefenseAir Force
  3. EMERGENCY BREATHING APPARATUS UTILIZING HYDROGEN PEROXIDE

    SBC: Abel Company            Topic: N/A

    THIS STUDY WILL EXAMINE THE FEASIBILITY AND PRACTICALITY OF UTILIZING HYDROGEN PEROXIDE OR HYDROGEN PEROXIDE COMPOUNDS/SOLUTIONS AS A LIGHT WEIGHT, COMPACT OXYGEN SOURCE FOR EMERGENCY BREATHING APPLICATIONS.

    SBIR Phase II 1985 Department of DefenseAir Force
  4. DEVELOPMENT OF A HIGHLY RELIABLE COST-EFFECTIVE CONTINUOUS MCONTINUOUS EMISSION MONITOR

    SBC: ADA Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1985 Environmental Protection Agency
  5. DESIGN AND MANUFACTURING PLAN FOR A COMPOSITE LOW ALTITUDE DISPENSER (LAD)

    SBC: Advanced Composite Products            Topic: N/A

    COMPOSITE MATERIALS SUCH AS GRAPHIT/EPOXY AND KEVLAR/EPOXY OFFER THE POTENTIAL TO REDUCE WEIGHT, RADAR CROSS SECTION (RCS), AND MANUFACTURED COSTS IN FLIGHT VEHCILE STRUCTURES. THIS PROGRAM IS DESIGNED TO APPLY THESE BENEFITS TO AFAL'S LOW ALTITUDE DISPENSER (LAD). AT THE SAME TIME THE CURRENT 11" PAYLOAD BAY WOULD BE INCREASED TO 12" TO INCREASE PAYLOAD VOLUME AND EFFICIENT MUNITIONS PACKING. AFT ...

    SBIR Phase II 1985 Department of DefenseAir Force
  6. CONTINUOUS HEATED ROLL FORMING OF THERMOPLASTIC COMPOSITE MATERIALS DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseAir Force
  7. COMMUNICATIONS

    SBC: Aes Corp            Topic: N/A

    THE AES CORPORATION HAS DEVELOPED A NOISE PROCESSOR (NP). THE PROCESSOR HAD THE ABILITY TO DETECT A SIGNAL OF KNOWN PULSE WIDTH BURIED DEEP WITHIN THE R.F. NOISE FLOOR OR ELECTRONIC JAMMING. THE COMBINATION OF PROPRIETARY HARDWARE AND SOFTWARE ALLOWS THE NP TO SEARCH FOR A VERY EXACT SIGNAL. THE SIGNAL PARAMETERS ARE PROGRAMMED INTO THE SOFTWARE. THE TWO CONCURRENT PROCESSORS ARRIVE AT THE PROBABI ...

    SBIR Phase I 1985 Department of DefenseAir Force
  8. A NEW RADIOGRAPHIC CORROSION INSPECTION CAPABILITY

    SBC: Aracor            Topic: N/A

    CORROSION OF EQUIPMENT AND MATERIAL IS AN UNBIQUITOUS NATIONAL PROBLEM COSTING THE U.S. ECONOMY OVER $70 BILLIONS ANNUALLY. REALTIME RADIOGRAPHY HAS BEEN IDENTIFIED AS ONE OF SEVERAL PROMISING NEW NDE TECHNOLOGIES BECAUSE OF ITS POTENTIAL ABILITY TO SOLVE A SIGNIFICANT NUMBER OF EXISTING CORROSION INSPECTION PROBLEMS. YET, IN SPITE OF ITS POTENTIALL ADVANTAGES, REAL-TIME RADIOGRAPHY HAS NOT YET DE ...

    SBIR Phase II 1985 Department of DefenseAir Force
  9. THE KEY TO THE DEVELOPMENT OF NEW HIGH-TEMPERATURE, HIGHER-PERFORMANCE, LIGHTER-WEIGHT MATERIALS IS AN UNDERSTANDING OF THE PROPERTIES AND BEHAVIOR OF THESE ADVANCED MATERIALS AS A FUNCTION OF THEIR MICROSTRUCTURE.

    SBC: Aracor            Topic: N/A

    THE KEY TO THE DEVELOPMENT OF NEW HIGH-TEMPERATURE, HIGHER-PERFORMANCE, LIGHTER-WEIGHT MATERIALS IS AN UNDERSTANDING OF THE PROPERTIES AND BEHAVIOR OF THESE ADVANCED MATERIALS AS A FUNCTION OF THEIR MICROSTRUCTURE. AN X-RAY TOMOSCOPE, BASED ON COMPUTER TOMOGRAPHY (CT) PRINCIPLES, IS CAPABLE OF SPATIALLY LOCATING AND SIZING MATERIAL FEATURES TO A RESOLUTION OF 25 MICRONS OR BETTER, WHILE PROVIDING ...

    SBIR Phase I 1985 Department of DefenseAir Force
  10. DESIGN SPECIFICATION FOR A MICROWAVE MOISTURE SOUNDER

    SBC: ATMOSPHERIC & ENVIRONMENTAL RESEARCH, INC.            Topic: N/A

    A RESEARCH PROGRAM TO PROVIDE SIMULATION MODELS APPLICABLE TO THE DESIGN SPECIFICATION OF A MICROWAVE MOISTURE SOUNDER OPERATING AT 183 GHZ IS DESCRIBED. THE DESIGN SPECIFICATION PROCESS CONSISTS OF INSTRUMENT RESPONSE SIMULATION, SENSITIVITY ANALYSES, AND MOISTURE RETRIEVAL PERFORMANCE ASSESSMENT. THE OBJECTIVE OF THE INITIAL EFFORT IS TO DEVELOP COMPUTER ALGORITHMS CAPABLE OF TREATING THE RESPON ...

    SBIR Phase II 1985 Department of DefenseAir Force
US Flag An Official Website of the United States Government